The Philips M1193A SpO2 sensor is a new, original, reusable pulse oximetry wrap sensor with a 1.5m cable and an 8-pin connector. It wraps securely around the hand or foot of neonatal patients weighing 1 – 4 kg (2.2 – 8.8 lbs) to measure oxygen saturation (SpO2) and pulse rate on Philips patient monitors, and it is manufactured without latex.
Key Benefits of the M1193A Neonatal SpO2 Sensor
- Original Philips part supplied new and original under Philips part number M1193A.
- Sized for the smallest patients designed for neonates from 1 kg to 4 kg, applied to the hand or foot.
- Secure wrap fit the soft wrap holds the emitter and detector in alignment on tiny application sites where a clip sensor cannot sit.
- Durable and comfortable a reusable design built for repeated clinical use while staying gentle on delicate skin.
- Made without latex suitable for latex-sensitive care environments.
Features of the Philips Neonatal Wrap Pulse Oximeter Sensor
- Reusable neonatal hand/foot wrap sensor
- 1.5m (approx. 4.9 ft) sensor cable
- 8-pin Philips SpO2 connector
- Measures SpO2 and pulse rate
- Supplied individually bagged, 1 piece per bag
- 3-month warranty
Philips M1193A Specifications
| Specification | Detail |
|---|---|
| Brand | Philips |
| Model / Part Number | M1193A |
| Product Type | Original |
| Condition | New |
| Sensor Type | Wrap (hand or foot) |
| Patient Size | Neonate, 1 – 4 kg (2.2 – 8.8 lbs) |
| Lifecycle | Reusable |
| Cable Length | 1.5m |
| Connector | 8-pin |
| Parameter | SpO2 and pulse rate |
| Latex | Manufactured without latex |
| Packaging Unit | 1 pc per bag |
| Warranty | 3 months |
Works With These Patient Monitors
- Philips IntelliVue: MP5, MP20, MP30, MP40, MP50, MP60, MP70, MP80, MP90, MX100, MX400, MX430, MX450, MX500, MX550, MX600, MX700, MX800, X2, X3
- Philips SureSigns: VM1, VM4, VM6, VM8, VS2, VS2+, VS3, VS4, VSi
- Philips HeartStart: MRx, XL, XLT, 4000
- Philips Avalon fetal monitors: FM20, FM30, FM40, FM50
- Philips modules and legacy units: M1020A, M1020B, M3000A, M3001A, M3002A MMS X2, M3046A (M3/M4), Viridia 24C, Codemaster 100
- Other brands: Goldway G40, Mindray V12, Solaris NT2A and NT2C
Some monitors connect through a Philips SpO2 adapter (extension) cable, which is not included. Please confirm the sensor listed in your monitor’s instructions for use, or contact us with your monitor model and we will help you check.
Where the M1193A Neonatal Wrap Sensor Is Used
- Neonatal intensive care units (NICU) and special care nurseries
- Delivery suites and postnatal wards
- Operating theatres and recovery for neonatal procedures
- Emergency departments and neonatal transport
Application and Care
- Wrap the sensor around the hand or foot so the emitter and detector sit opposite each other.
- Secure it snugly but not tightly; inspect the site regularly and reposition as clinically required.
- Clean and disinfect between patients according to your facility protocol and the instructions for use.
- Do not immerse the connector, and remove the sensor from service if the cable or wrap is damaged.
Frequently Asked Questions
What is the Philips M1193A SpO2 sensor?
The Philips M1193A is an original reusable neonatal SpO2 wrap sensor with a 1.5m cable that measures oxygen saturation and pulse rate on the hand or foot.
What patient weight is the M1193A designed for?
It is designed for neonatal patients weighing 1 – 4 kg (2.2 – 8.8 lbs).
Is the Philips M1193A reusable?
Yes. It is a reusable sensor that can be cleaned and disinfected between patients following your facility protocol.
How long is the cable and what connector does it use?
The cable is 1.5m long and ends in an 8-pin Philips SpO2 connector.
Does the M1193A contain latex?
No. The sensor is manufactured without latex.
Related SpO2 Sensors
Need a different cable length or a single-patient option?
See the Philips M1193B Neonate Wrap SpO2 Sensor 1.0m, the Philips M1193AL Neonate Wrap SpO2 Sensor 3.0m, the Philips M1133A Disposable SpO2 Sensor 0.9m and the Philips Neonate Wrap SpO2 Sensor 3.0m (Masimo SET).
Reviews
There are no reviews yet.