Philips M1192B Pediatric Soft Tip SpO2 Sensor 1.0m (FAST 8 Pin Reusable New)

The Philips M1192B pediatric soft tip SpO2 sensor is a new, reusable pulse oximetry finger sensor with a 1.0m cable and an 8-pin connector, built to the Philips M1192B reference specifications for monitors that use Philips FAST SpO2 technology. It measures oxygen saturation (SpO2) and pulse rate on pediatric patients and plugs into Philips IntelliVue, SureSigns, HeartStart and Avalon series equipment.

Key Benefits of This Pediatric SpO2 Finger Sensor

• Sized for children: The soft silicone tip is shaped for pediatric fingers, helping the sensor sit securely without pinching.
• Comfort during longer monitoring: A flexible soft tip spreads pressure evenly, unlike a spring-loaded clip.
• Reusable design: Wipe clean between patients to lower the cost per use compared with single-patient adhesive sensors.
• Short 1.0m lead: Keeps cable clutter down at the bedside, on transport monitors and when used with an SpO2 extension cable.
• FAST SpO2 signal path: Made for the Philips FAST (Fourier Artifact Suppression Technology) measurement platform.

Features of the M1192B Soft Tip Pulse Oximeter Sensor

• Pediatric soft tip (silicone boot) sensor style
• 1.0m (approx. 3.3 ft) cable length
• 8-pin Philips-style keyed connector
• Philips FAST SpO2 technology
• Reusable, latex-free patient-contact design
• Supplied new, 1 piece per bag

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

Philips

• IntelliVue: MP2, MP5, MP5SC, MP5T, MP20, MP20 Junior, MP30, MP40, MP50, MP60, MP70, MP80, MP90, MX100, MX400, MX430, MX450, MX500, MX550, MX600, MX700, MX800, X2, X3, XG50
• SureSigns: VM1, VM4, VM6, VM8, VS2, VS2+, VS3, VS4, VSi
• HeartStart defibrillator/monitors: MRx, MPx, XL, XLT, Heartstart 4000, Heartstream XL
• Avalon fetal monitors: FM20, FM30, FM40, FM50
• Measurement modules: M1020A, M1020B, M3000A, M3001A, M3002A MMS X2, M8102A, M8105A
• Other: M3, M4, M3046A, C1, C3, Viridia 24C, Agilent Series 50XM, Codemaster 100, TRx M4841A telemetry

Other Brands

• Goldway G40
• Mindray V12
• Solaris NT2A, NT2C

Always confirm that your monitor is fitted with Philips FAST SpO2 and an 8-pin SpO2 input before ordering.

Use Cases

• Spot-check and continuous SpO2 monitoring of pediatric patients in hospital wards
• Emergency departments, recovery rooms and pediatric ICU bedside monitoring
• Patient transport with portable IntelliVue and HeartStart units
• Clinics, day-surgery centres and biomedical engineering spare stock

Application and Care

• Slide the soft tip over a clean, dry finger with the cable running along the top of the hand.
• Check the site regularly and move the sensor periodically, following your facility protocol.
• Clean and disinfect the surface between patients with an approved wipe; do not autoclave or immerse the connector.
• Inspect the cable and tip for damage before each use.

Frequently Asked Questions

What is the Philips M1192B pediatric soft tip SpO2 sensor used for?

It is a reusable finger sensor that measures blood oxygen saturation and pulse rate in pediatric patients on monitors using Philips FAST SpO2 technology.

Which monitors does this M1192B SpO2 sensor work with?

It works with Philips IntelliVue MP and MX series, SureSigns VM and VS series, HeartStart MRx and XL, and Avalon FM20 to FM50 monitors, plus Goldway G40, Mindray V12 and Solaris NT2A/NT2C.

How long is the cable and what connector does it have?

The cable is 1.0m (about 3.3 ft) long and ends in an 8-pin connector that plugs into the SpO2 input or an SpO2 extension cable.

Is this pediatric SpO2 sensor reusable?

Yes. It is a reusable sensor that can be cleaned and disinfected between patients according to your facility protocol.

What is the difference between a soft tip and a hard shell SpO2 sensor?

A soft tip sensor uses a flexible silicone boot that slides over the finger for gentle, even pressure, while a hard shell sensor uses a spring-loaded clip. Soft tips are often preferred for longer monitoring periods.

Is this sensor new and certified?

Yes.

Related SpO2 Sensors

Need a different length or patient size?

See the Philips M1192AL Pediatric Soft Tip SpO2 Sensor 3.0m, the Philips M1192AL Pediatric Hard Shell SpO2 Sensor 3.0m, the Philips M1193B Neonate Wrap SpO2 Sensor 1.0m, the Philips M1196A Adult Hard Shell SpO2 Sensor 1.0m or the Nellcor FLEXMAX-P Pediatric Soft Tip SpO2 Sensor 1.0m.