Nihon Kohden TL-273T Adult/Neonate Non-Woven Adhesive SpO2 Sensor 0.9m (Disposable Box of 24)

The Nihon Kohden TL-273T SpO2 sensor is a disposable, non-woven adhesive pulse oximetry sensor for adult and neonate patients, with a 0.9m cable and 9-pin connector. This new sensor is built to the Nihon Kohden TL-273T reference specifications, uses Nihon Kohden SpO2 technology, and is supplied in a box of 24 for single-patient use on Nihon Kohden Life Scope and BSM series patient monitors.

Key Benefits of the TL-273T Adult/Neonate Adhesive SpO2 Sensor

• Two patient groups, one sensor: Sized for adult and neonate application, reducing the number of sensor types a ward needs to stock.
• Single-patient use: Disposable design supports infection-control protocols in NICU, ICU and theatre.
• Soft non-woven adhesive: Breathable, flexible tape conforms to the application site for secure placement during continuous monitoring.
• Direct fit: 9-pin connector made for Nihon Kohden SpO2 technology monitors.
• Bulk value: 24 sensors per box for busy clinical departments.

Features

• Patient size: Adult / Neonate
• Sensor type: Non-woven adhesive wrap
• Cable length: 0.9m (approx. 3 ft)
• SpO2 technology: Nihon Kohden
• Connector: 9-pin
• Lifecycle: Disposable

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

Nihon Kohden

• Life Scope I (BSM-2300, BSM-2301, BSM-230K, 2303, 2303K), MSM 2301K
• Life Scope L (BSM-2350, BSM-2351, 2353)
• Life Scope P (BSM-4100, BSM-4101, 4111, 4113)
• Life Scope A (BSM-5100, BSM-5105, 5135)
• BSM-3500, BSM-6000 series (BSM-6301K, BSM-6501K, BSM-6701K)
• Life Scope M (BSM-9510), Life Scope S (BSM-9800), Life Scope TR
• Oxipal P225F

Hamilton

• G5, S1

Use Cases

• Continuous SpO2 and pulse rate monitoring in NICU and special care nurseries
• Adult monitoring in ICU, emergency, recovery and operating theatres
• Isolation and infection-control settings where single-patient sensors are required
• Biomedical engineering and hospital supply restocking of Nihon Kohden disposable SpO2 sensors

Application and Care

• Apply to clean, dry skin and align the emitter and detector opposite each other across the site.
• Check the application site regularly and reposition as required by your clinical protocol.
• Single-patient use only. Do not clean, sterilise or reuse on another patient.
• Follow the monitor manufacturer’s instructions for use.

Frequently Asked Questions

What is the Nihon Kohden TL-273T SpO2 sensor used for?

It is a disposable adhesive pulse oximetry sensor used to measure oxygen saturation (SpO2) and pulse rate in adult and neonate patients on Nihon Kohden SpO2 technology monitors.

How many sensors are in one box?

Each box contains 24 individually usable sensors.

Which monitors does this sensor work with?

It works with Nihon Kohden Life Scope and BSM series monitors, including BSM-2301, BSM-2351, BSM-4100, BSM-5100, BSM-6000 series, BSM-9510 and BSM-9800, as well as Hamilton G5 and S1.

Is this sensor reusable?

No. It is a disposable, single-patient-use sensor and should be discarded after use.

How long is the cable and what connector does it use?

The cable is 0.9m long and terminates in a 9-pin connector.

Is the sensor new?

Yes.

What part numbers does it cross-reference?

Nihon Kohden TL-273T, TL-273T3, TL-253T, P203G and P203C; Envitec DW-2203-6 and DN-2203-6 series; Unimed U543-16; AMC PR-E630-1013P.

Related SpO2 Sensors

Also available: the Nihon Kohden TL-271T Adult Non-Woven Adhesive SpO2 Sensor 0.9m, the reusable Nihon Kohden TL-201T Adult Hard Shell SpO2 Sensor 1.6m, the Nihon Kohden Adult Ear Clip SpO2 Sensor 1.6m, the Nihon Kohden Pediatric Soft Tip SpO2 Sensor 1.6m and, for Nellcor OxiMax monitors, the Nellcor MAX-N Adult/Neonate Adhesive SpO2 Sensor 0.9m.