Nihon Kohden TL-272T Pediatric Non-Woven Adhesive SpO2 Sensor 0.9m (Disposable Box of 24)

The Nihon Kohden TL-272T pediatric SpO2 sensor is a disposable, single-patient-use pulse oximetry sensor with a soft non-woven adhesive wrap and a 0.9m cable. Built to the Nihon Kohden TL-272T reference specifications, it connects through a 9-pin connector to Nihon Kohden Life Scope and BSM series patient monitors and measures oxygen saturation (SpO2) and pulse rate in pediatric patients. It is supplied new in a box of 24 sensors.

Key Benefits of This Pediatric Disposable SpO2 Sensor

• Single-patient use: A fresh sensor for each child helps reduce cross-contamination risk.
• Gentle non-woven adhesive: Breathable, flexible fabric tape conforms to small fingers and stays in place during movement.
• Pediatric sizing: Sensor wrap is clearly marked “PEDIATRIC” for quick identification at the bedside.
• Direct monitor connection: 9-pin connector matches Nihon Kohden SpO2 technology with no adapter change to your workflow.
• Cost-effective box of 24: Suited to wards, theatres, emergency departments and clinics with regular pediatric throughput.

Features

• Patient size: Pediatric
• Sensor type: Non-woven adhesive wrap
• Cable length: 0.9m (approx. 3 ft)
• SpO2 technology: Nihon Kohden
• Connector: 9-pin
• Lifecycle: Disposable, single-patient use

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

Nihon Kohden

• Life Scope I (BSM-2300, 2303, 2303K, BSM-2301, BSM-230K, MSM 2301K)
• Life Scope L (BSM-2350, 2353, BSM-2351)
• Life Scope P (BSM-4100, BSM-4101, 4103, 4111, 4113)
• Life Scope A (BSM-5100, BSM-5105, 5135)
• BSM-3500, BSM-6000 series (BSM-6301K, BSM-6501K, BSM-6701K)
• Life Scope M (BSM-9510), Life Scope S (BSM-9800), Life Scope TR
• Oxipal P225F

Hamilton

• Hamilton G5, Hamilton S1

Always confirm the SpO2 connector and technology on your monitor before ordering.

Use Cases

• Continuous SpO2 monitoring of pediatric patients in general wards and PICU
• Peri-operative and recovery room monitoring
• Emergency departments and patient transport
• Infection-control protocols requiring single-patient-use sensors

Application and Care

• Apply to clean, dry skin with the emitter and detector aligned opposite each other on the finger.
• Do not wrap too tightly; check the site regularly and reposition as clinical policy requires.
• For single-patient use only. Do not clean, sterilise or reuse on another patient.
• Dispose of according to your facility’s clinical waste procedures.

Frequently Asked Questions

What is the Nihon Kohden TL-272T pediatric SpO2 sensor used for?

It is used to measure blood oxygen saturation (SpO2) and pulse rate in pediatric patients on Nihon Kohden Life Scope and BSM series monitors.

Is this sensor reusable?

No. It is a disposable non-woven adhesive sensor intended for single-patient use.

How many sensors are in one box?

Each box contains 24 pediatric sensors.

What is the cable length and connector type?

The cable is 0.9m long and ends in a 9-pin connector for Nihon Kohden SpO2 technology.

Which part numbers does it cross-reference to?

Nihon Kohden TL-272T, TL-272T3, TL-252T, P203F and P203B, as well as Envitec DP-2203-2/DP-2203-2S, Unimed U523-16 and AMC PR-E610-1013P.

Related SpO2 Sensors

Need a different size or style?

See the Nihon Kohden Adult Non-Woven Adhesive SpO2 Sensor 0.9m, the reusable Nihon Kohden Pediatric Soft Tip SpO2 Sensor 1.6m, the Nihon Kohden TL-201T Adult Hard Shell SpO2 Sensor 1.6m, the Nihon Kohden Adult Ear Clip SpO2 Sensor 1.6m, or the Nellcor MAX-I Infant Disposable SpO2 Sensor 0.9m.