The GE TruSignal Pediatric Hard Shell SpO2 Sensor 1.0m is a new, reusable pediatric finger clip pulse oximetry sensor with a 1.0 metre cable and a 9-pin connector. It is built to the GE Healthcare TS-SP-D reference specifications and works with GE Healthcare and Datex Ohmeda patient monitors and anaesthesia systems that use GE TruSignal SpO2 technology, delivering oxygen saturation (SpO2) and pulse rate readings on children.
Key Benefits of This Pediatric TruSignal SpO2 Sensor
- Sized for children: A smaller hard shell clip designed for pediatric fingers, giving a more secure fit than an adult sensor.
- Fast spot checks and short-term monitoring: The spring-loaded clip goes on and comes off in seconds.
- Reusable design: Clean and reuse between patients, lowering cost per use compared with single-patient sensors.
- Direct connection: The 9-pin plug connects to GE TruSignal SpO2 inputs and interconnect cables.
- Short 1.0m lead: Tidy cable management at the bedside, in transport and in theatre.
- 12-month warranty for peace of mind.
Features
- Pediatric hard shell (finger clip) sensor style
- GE TruSignal SpO2 technology
- 1.0m (approx. 3.3 ft) cable
- 9-pin blue connector
- Reusable sensor for multi-patient use
- Supplied new, 1 piece per bag
Technical Specifications
| Specification | Detail |
|---|---|
| Product | Pediatric Hard Shell SpO2 Sensor |
| SKU | DO-TSSPD-SPO2-PED-HS-9P-1M |
| Reference Part Number | GE Healthcare TS-SP-D |
| SpO2 Technology | GE TruSignal |
| Patient Size | Pediatric |
| Sensor Type | Hard shell (finger clip) |
| Cable Length | 1.0m (3.3 ft) |
| Connector | 9-pin |
| Lifecycle | Reusable |
| Condition | New |
| Unit | 1 pc per bag |
| Warranty | 12 months |
Part Number Cross-Reference
| Brand | Reference Number |
|---|---|
| GE Healthcare | TS-SP-D |
| Unimed | U103-117 |
| Praymed | PSB0190-S |
Note: the original GE TS-SP-D is a soft shell sensor. This sensor is a hard shell finger clip built to the same electrical and connector specifications.
Works With These Monitors
Datex Ohmeda
- 3775, 37xx Series, 3800, 3900, 3900P, 4700, 5250
- AS/3 and CS/3 with M-OSAT module
- S/5 with M-OSAT module, S/5 and i4 with E-series modules
- E-PRESTN, Cardiocap/5, TruSignal, TuffSat
GE Healthcare
- Aisys, Aisys CS2
- B20, B20i, B40
- CARESCAPE B650, CARESCAPE ONE, CARESCAPE Canvas, CARESCAPE V100
- DINAMAP B125
Please confirm that your monitor uses GE TruSignal SpO2 technology and a 9-pin sensor connection before ordering.
Use Cases
- Pediatric wards and emergency departments
- Operating theatres and recovery (PACU) with GE anaesthesia systems
- Spot-check and short-term continuous SpO2 monitoring of children
- Biomedical engineering departments stocking replacement sensors
Application and Care
- Place the sensor on a clean, dry finger with the cable running along the back of the hand.
- Check the application site regularly and move the sensor as clinically required.
- Wipe clean between patients with a soft cloth and an approved disinfectant; do not immerse or autoclave.
- Inspect cable and clip for damage before each use.
Frequently Asked Questions
What is the GE TruSignal Pediatric Hard Shell SpO2 Sensor used for?
It measures blood oxygen saturation (SpO2) and pulse rate on pediatric patients when connected to a GE Healthcare or Datex Ohmeda monitor with GE TruSignal technology.
Which part number does this sensor reference?
It references GE Healthcare TS-SP-D, and also cross-references Unimed U103-117 and Praymed PSB0190-S.
Is this sensor hard shell or soft shell?
This is a hard shell finger clip sensor. The original GE TS-SP-D is a soft shell design; this sensor uses the same connector and TruSignal technology in a clip-style housing.
How long is the cable and what connector does it use?
The cable is 1.0 metre (about 3.3 feet) long and ends in a 9-pin connector for GE TruSignal SpO2 inputs.
Is the sensor reusable?
Yes. It is a reusable sensor that can be cleaned between patients and carries a 12-month warranty.
Will it work with a GE CARESCAPE B650 or B40 monitor?
Yes, the CARESCAPE B650 and B40 are listed among the supported GE Healthcare monitors, provided the monitor is configured with GE TruSignal SpO2.
Related SpO2 Sensors
Need a different size or style?
See the GE TS-F-D Adult Hard Shell SpO2 Sensor 1.0m, the GE TruSignal TS-F4-MC Adult Hard Shell SpO2 Sensor 3.0m, the GE TruSignal TS-AAW-10 Adult Adhesive SpO2 Sensor, the Datex Ohmeda Pediatric Hard Shell SpO2 Sensor 3.0m or the GE Healthcare Pediatric Hard Shell SpO2 Sensor 3.0m (OxiMax).
















Reviews
There are no reviews yet.