Nihon Kohden Adult Non-Woven Adhesive SpO2 Sensor 0.9m (TL-271T Reference)

The Nihon Kohden adult non-woven adhesive SpO2 sensor is a single-patient-use pulse oximetry sensor built to the TL-271T(0.9m) reference, designed to measure blood oxygen saturation (SpO2) and pulse rate on Nihon Kohden and Nihon Kohden-equipped patient monitors. Each sensor features a soft, breathable adhesive wrap that secures around an adult fingertip and a 0.9m (3 ft) cable terminating in a 9-pin connector, supplied 24 sensors per box.

Key Features and Benefits

• New, single-patient-use adhesive SpO2 sensor for adult patients
• Soft non-woven adhesive wrap for a secure, comfortable fit on the fingertip
• 0.9m (3 ft) integrated cable with a 9-pin connector
• Built to the Nihon Kohden TL-271T(0.9m) reference for accurate, consistent readings
• Supplied 24 sensors per box for high-turnover clinical environments

Nihon Kohden TL-271T Reference and Cross-Reference Numbers

Works With These Monitor Platforms

This sensor is built to the Nihon Kohden TL-271T(0.9m) reference and is designed to work with a wide range of Nihon Kohden and Hamilton patient monitors that accept this 9-pin adhesive SpO2 sensor interface.

Cross-Reference Numbers

supported Monitor Models for Nihon Kohden Adult Non-Woven Adhesive SpO2 Sensor

Please confirm your exact monitor model’s SpO2 port before ordering.

Technical Specifications of Nihon Kohden Adult Non-Woven Adhesive SpO2 Sensor

Who Should Buy This Sensor? (Use Cases)

• Hospitals and clinics needing single-patient-use adult SpO2 sensors for Nihon Kohden monitors
• High-turnover units (ED, ICU, recovery) that require fresh adhesive sensors between patients for infection control
• Biomedical and procurement teams stocking consumable SpO2 sensors in bulk box quantities
• Facilities standardising on the TL-271T reference across their Nihon Kohden monitor fleet

Care and Handling

This is a single-patient-use disposable sensor and should not be reused between patients. Store in a cool, dry place away from direct sunlight, and inspect the adhesive wrap and cable before each use. Discard if the adhesive is compromised or the sensor shows any signs of damage.

Frequently Asked Questions

What does the Nihon Kohden adult non-woven adhesive SpO2 sensor measure?

It measures blood oxygen saturation (SpO2) and pulse rate through an adhesive sensor wrapped around an adult fingertip, connected to a supported Nihon Kohden patient monitor.

What is the cable length on this sensor?

The cable measures 0.9m (approximately 3 ft) from the sensor to the 9-pin connector.

Which monitors does this sensor work with?

It is built to the Nihon Kohden TL-271T(0.9m) reference and is designed to work with Nihon Kohden Life Scope-series monitors and select Hamilton G5/S1 monitors. Check the fit table above and confirm your exact monitor model before ordering.

Is this sensor reusable or single-use?

This is a disposable, single-patient-use sensor supplied 24 per box. It is not designed to be reused between patients.

What patient size is this sensor designed for?

It is sized for adult patients.

How many sensors come in one box?

Each box contains 24 individually wrapped adhesive SpO2 sensors.

Related SpO2 Sensors

Looking for other adult SpO2 sensor options? See our Nellcor DS100A Adult Finger Clip SpO2 Sensor, Masimo 4050 RD Set DCI Short SpO2 Adult Clip, Philips M1194B Adult Ear Clip SpO2 Sensor, Nellcor MAXA-NS Adult SpO2 Sensor, and Pediatric Hard Shell SpO2 Sensor Nellcor D-YSPD.