The Nellcor adult soft tip SpO2 sensor is a reusable pulse oximetry finger sensor built to Nellcor OxiMax sensor technology specifications, with a 9-pin connector and a 3.0m (9.8 ft) cable. It is designed for adult patients and works with the wide range of Nellcor OxiMax-technology patient monitors listed below.
Overview
This adult soft tip SpO2 sensor wraps gently around a patient’s fingertip to provide continuous, non-invasive monitoring of blood oxygen saturation (SpO2) and pulse rate. The soft-tip housing and flexible cable allow it to be reused across multiple patients when cleaned according to facility protocol, making it a cost-effective choice for hospitals, clinics, EMS, and long-term care settings already using Nellcor OxiMax-technology monitors. The extended 3.0m cable gives clinicians additional reach between the patient and the monitor compared to the standard 1.0m sensor.
Key Benefits
- Accurate, continuous readings: Nellcor OxiMax sensor technology supports reliable SpO2 and pulse rate monitoring on adult patients.
- Extended 3.0m cable: Gives clinicians more room to position the monitor away from the bedside.
- Reusable, cost-effective design: A durable soft-tip housing is built for repeated use, reducing per-patient sensor cost compared to disposable sensors.
- Broad monitor support: The 9-pin OxiMax connector works with monitors from GE Healthcare, Mindray, Philips, Nihon Kohden, Welch Allyn, and other OEM brands listed below.
- Comfortable fit: The soft-tip design fits comfortably over the fingertip for quick sensor placement and patient comfort during extended monitoring.
- New condition: Ships new, ready for immediate use.
Features & Specifications
The table below summarises the key specifications of this SpO2 sensor for quick reference:
| Specification | Detail |
|---|---|
| Patient Size | Adult |
| Sensor Type | Soft Tip (finger) |
| SpO2 Technology | Nellcor OxiMax |
| Connector | 9-Pin |
| Cable Length | 3.0m (9.8 ft) |
| Lifecycle | Reusable |
| Condition | New |
| Unit | 1 sensor per pack |
| Warranty | 12 Months |
Cross-Reference Numbers
This sensor is built to match the fit, form, and function of the following brand reference numbers:
- Orantech: SS-001XN-AS30
- Unimed: U410S-01P
Monitor Fitment
This 9-pin Nellcor OxiMax sensor works with adult SpO2 monitoring on equipment from OEM brands including:
- Nellcor (monitors using OxiMax technology with a 9-pin connector, including N-595, N-600, N-3000, NPB series, PM100N)
- GE Healthcare (Carescape B650, Carescape V100, Pro Series, ProCare, Dash 2500/3000/4000/5000, Solar 8000/8000M)
- Mindray (BeneVision N1/N12/N15/N17/N22, BeneView T1, Passport series, Spectrum)
- Philips (IntelliVue MP2/MP70/MX450, M3001A, M3002A, SureSigns VS2/VS3)
- Nihon Kohden (BSM-2300, BSM-4100, BSM-5100 series)
- Datascope (Passport, Accutorr Plus, Expert, DPM5/6/7)
- Welch Allyn (Propaq CS/LT/106-EL/202-EL, Atlas, Spot Vital Signs)
Always confirm your exact monitor model before ordering.
Use Cases
- Hospital and clinic bedside patient monitoring for adult patients
- Replacement or spare sensor for existing Nellcor OxiMax-technology monitors
- EMS and transport monitoring where a reusable, durable, longer-cable sensor is preferred
- Sleep labs and outpatient settings requiring continuous adult SpO2 monitoring
Frequently Asked Questions
What is this Nellcor SpO2 sensor used for?
It is used to continuously monitor blood oxygen saturation (SpO2) and pulse rate on adult patients via a soft-tip fingertip sensor connected to a supported OxiMax-technology patient monitor.
Is this sensor reusable or disposable?
This is a reusable sensor. It is intended for multi-use on the same patient and can be used across multiple patients when cleaned according to your facility’s infection-control protocol.
What connector type does this sensor use?
It uses a 9-pin connector built to the Nellcor OxiMax interface.
How long is the sensor cable?
The cable measures 3.0 metres (approximately 9.8 feet) from the sensor to the connector, longer than the standard 1.0m version.
Will this sensor work with my monitor?
It is built to work with any monitor that accepts a 9-pin Nellcor OxiMax adult sensor, including many GE, Mindray, Philips, Nihon Kohden, and Welch Allyn models. Check the model list above or contact us to confirm your specific model.
Does this sensor include a warranty?
Yes, it is covered by a 12-month warranty and ships new.
Related SpO2 Sensors
Looking for other adult SpO2 sensor options? See our Nellcor Adult Finger Soft SpO2 Sensor, 1.0m (9-Pin), Philips M1191BL Adult Soft Tip SpO2 Sensor, 3.0m, Nellcor Pediatric Clip SpO2 Sensor, 9-Pin, Nellcor Infant Soft SpO2 Sensor, 9-Pin, and the Nellcor Adult Ear Clip SpO2 Sensor, 14-Pin.
Reviews
There are no reviews yet.