The Philips pediatric SpO2 sensor is a reusable hard-shell finger-clip pulse oximetry probe sized for children. It uses the Nellcor Oxismart sensor interface and connects to Philips patient monitors with an Oxismart 12-pin round sensor port through a 3.0-metre cable, delivering continuous oxygen saturation (SpO2) and pulse-rate readings.
Supplied as new stock, this pediatric hard shell SpO2 sensor gives hospitals, clinics, and biomedical teams a durable, reusable option for monitoring smaller patients on legacy Philips monitors.
Key Benefits of This Pediatric Hard Shell Pulse Oximeter Sensor
- Sized for children: Pediatric-size finger clip positions the emitter and detector correctly on smaller fingers for stable readings.
- Rigid hard-shell housing: Spring-loaded clip holds its position and helps reduce motion artefact during routine checks.
- Reusable and cost-effective: Lowers cost-per-patient compared with single-use disposable sensors.
- Plug-and-play connection: 12-pin round connector plugs directly into Oxismart-interface Philips monitors, no adapter cable required.
- Extra reach: 3.0m (9.8ft) cable suits bedside, trolley-mounted, and wall-mounted monitor setups.
Features of the Philips 12-Pin Oxismart SpO2 Sensor
Sensor Design
- Pediatric hard-shell finger clip with spring-loaded hinge
- Smooth, easy-to-wipe housing for cleaning between patients
- Lightweight clip for comfortable wear during extended monitoring
Connector and Cable
- 12-pin round connector built for the Nellcor Oxismart sensor interface
- Keyed connector housing for correct alignment on every connection
- Flexible 3.0m cable with a durable jacket that resists kinking from routine handling and cleaning
Product Specifications
| Product Name | Philips Pediatric Hard Shell SpO2 Sensor 3.0m |
| Brand Fit | Philips patient monitors (Oxismart 12-pin sensor port) |
| SpO2 Technology | Nellcor Oxismart (non-OxiMax) |
| Patient Size | Pediatric |
| Sensor Type | Hard shell finger clip |
| Connector | 12-pin round connector |
| Cable Length | 3.0m / 9.8ft |
| Lifecycle | Reusable |
| Unit | 1 sensor per bag |
| Warranty | 12 months |
| Condition | New |
Cross-Reference Part Numbers
| Brand | Reference Number |
| Unimed | U110-20 |
Philips Monitors This Pediatric SpO2 Sensor Works With
Built for Philips monitors using the Nellcor Oxismart 12-pin round sensor interface, including:
78352A, 78352C, 78354A, 78354C, 78833A, 78833C, 78834A, 78834C, Agilent Series 50XM Fetal Monitor, Codemaster, Codemaster XL, HeartStart XL, M1020A, M1025A, M1025B, M1092A, M1094A, M1094B, M1166A, M1167A, M1175A, M1177A, M1204A, M1205A, M1275A, M1350, M1350B, M1351A, M1353A, M1722A, M1722A/B, M1722B, M1723A, M1723B, M1732A, M1732A/B, M1732B, M2475B, M3046A (M4 chip), Merlin, Omnicare, V24, V24E, Viridia 50 IP, Viridia 24, Viridia 24C, Viridia A1, and Viridia A3.
Clinical Use Cases
- Pediatric wards and children’s hospitals
- Emergency departments and urgent care
- Operating theatres, recovery (PACU), and day-procedure units
- Defibrillator/monitor spot checks on HeartStart XL and Codemaster units
- Biomedical engineering departments replacing worn sensors on legacy Philips fleets
Application and Care
- Choose a finger that fills the clip without being squeezed; reposition every few hours during extended monitoring.
- Keep the emitter and detector windows clean and free of nail polish for accurate readings.
- Wipe the sensor and cable with a facility-approved disinfectant between patients. Do not immerse or autoclave.
- Confirm your monitor’s sensor port is the Oxismart 12-pin round type before connecting.
Frequently Asked Questions
Which Philips monitors does this pediatric SpO2 sensor work with?
It works with Philips monitors fitted with the Nellcor Oxismart 12-pin round SpO2 port, such as the Merlin, Omnicare, Viridia 24 series, V24/V24E, M1350 fetal monitors, HeartStart XL, and Codemaster.
Is this sensor suitable for adults or infants?
No. It is sized for pediatric patients. Adults should use an adult finger sensor, and infants or neonates are better served by a wrap-style sensor.
Does it work with Philips FAST 8-pin monitors like IntelliVue?
No. This sensor uses the Nellcor Oxismart interface with a 12-pin round connector. Philips FAST monitors with 8-pin ports need a FAST-technology sensor.
Is the sensor reusable?
Yes. It is a reusable sensor designed for repeated clinical use when cleaned and disinfected between patients according to your facility’s protocol.
How long is the cable?
The cable is 3.0 metres (about 9.8 feet) long.
What is the cross-reference part number?
It cross-references to Unimed U110-20.
Is this product new?
Yes, it is supplied as new stock and backed by a 12-month warranty.
Related SpO2 Sensors
For adult patients on the same monitors, see our Philips M1190A adult hard shell SpO2 sensor.
For Philips FAST monitors, choose the Philips M1192AL pediatric hard shell SpO2 sensor or the Philips M1191BL adult soft tip SpO2 sensor.
Other pediatric options include the Nellcor D-YSPD pediatric hard shell SpO2 sensor and the Masimo 1864 pediatric hard shell SpO2 sensor.
Reviews
There are no reviews yet.