A Datex Ohmeda All-Sizes Multi-Y SpO2 Sensor is a reusable pulse oximetry trunk cable that connects to Datex Ohmeda and GE Healthcare patient monitors, delivering continuous blood oxygen saturation (SpO2) and pulse rate readings across adult, pediatric, and neonatal patients from a single all-sizes cable. This brand-new 3.0m (9.8 ft) sensor is built to the Datex Ohmeda OXY-W4-N / Unimed U810-09 reference specification and terminates in a 10-pin round direct-connect plug, so it goes straight into a supported bedside monitor without an extension or adapter cable.
Key Features & Benefits
Universal, All-Sizes Coverage
- All Sizes patient rating – one Multi-Y sensor covers adult, pediatric, and neonatal SpO2 monitoring.
- Simplified inventory – reduces the need to stock separate size-specific probes for every ward.
- Reusable construction – lowers per-patient monitoring costs compared with single-use adhesive sensors.
Datex Ohmeda SpO2 Technology & Direct-Connect Fit
- 10-pin round direct-connect plug – built to the Datex Ohmeda OXY-W4-N / Unimed U810-09 reference, so it plugs straight into supported monitors with no adapter cable required.
- Datex Ohmeda SpO2 technology – engineered for consistent oxygen saturation and pulse-rate accuracy on Datex Ohmeda and GE TruSignal ports.
- Includes Y-strip wrap accessories – adhesive strips for securing the sensor at the monitoring site.
Built for Everyday Clinical Use
- 3.0m (9.8 ft) cable – ample reach for bedside monitors, anesthesia carts, and transport setups.
- with a 12-month warranty.
- Brand-new condition, ready to use out of the box.
Technical Specifications
| Parameter | Details |
| Patient Size | All Sizes (Adult / Pediatric / Neonate) |
| Sensor Type | Multi-Y (trunk cable) |
| Cable Length | 3.0 m (9.8 ft) |
| Connector | 10-pin round, direct-connect |
| SpO2 Technology | Datex Ohmeda |
| Lifecycle | Reusable |
| Unit | 1 set/bag |
| Condition | New |
| Warranty | 12 Months |
| Cross-Reference | Datex Ohmeda OXY-W4-N; Unimed U810-09 |
Works With These Monitor Models
This sensor’s 10-pin direct-connect plug is built to the same reference as the Datex Ohmeda OXY-W4-N and Unimed U810-09, so it goes onto the monitor families below. Please confirm your exact model and connector before ordering.
Datex Ohmeda & GE Healthcare Monitors
- Aespire, Aespire 15
- AS/3, AS/3 Compact, AS/3 with M-series modules
- Capnomac Ultima
- Cardiocap I, Cardiocap II, Cardiocap S/5 Light, Cardiocap/5
- CG/2S, CH-RS, CH/2S, CH/S
- CS/3, CS/3 with M-series modules, CS/5, CS/5 Compact
- Light Monitor, M-ESTP, M-NESTPR, M-PRESTN
- Oscar II, OSP-200
- S/5, S/5 with M-series modules
- Satellite, Satellite Plus II, Satellite Trans
- System 5, Trans Plus
- TruSignal-equipped monitors
- ULTS00, ULTSIO, ULTSVI, ULTSVO
- GE Healthcare Datex Ohmeda S5
Use Cases
- ICU and general ward continuous SpO2 monitoring across mixed adult, pediatric, and neonatal patients
- Perioperative and anesthesia monitoring on Datex Ohmeda anesthesia workstations such as Aespire and S/5
- Transport and recovery-room monitoring where a single trunk cable needs to serve multiple patient sizes
- Facilities standardising on one Datex Ohmeda-reference SpO2 connection across departments
Care & Maintenance
- Wipe down with an approved hospital-grade disinfectant between patients.
- Keep the connector end dry – do not soak or submerge it.
- Store flat, away from direct sunlight and sharp edges.
- Inspect the cable and adhesive wrap strips for wear or cracking before each use.
Related SpO2 Sensors
Rounding out a Datex Ohmeda / GE monitoring bay or a mixed reusable SpO2 sensor lineup:
- Masimo 1863 LNCS DCI Adult Reusable SpO2 Sensor
- Nonin Vet Multi-Y SpO2 Sensor, 3.0m
- Philips M1194B Adult Ear Clip SpO2 Sensor, 1.0m
- Philips M1191BL Adult Soft Tip SpO2 Sensor, 3.0m
- Nellcor D-YSE Adult Ear Clip SpO2 Sensor, 3.0m
Frequently Asked Questions
What is a Datex Ohmeda Multi-Y SpO2 sensor used for?
It is a reusable trunk cable that measures blood oxygen saturation (SpO2) and pulse rate across adult, pediatric, and neonatal patients on Datex Ohmeda and GE Healthcare patient monitors.
What connector does this sensor use?
A 10-pin round direct-connect plug built to the Datex Ohmeda OXY-W4-N (Unimed U810-09) reference, so it plugs straight into the monitor without needing an extension cable.
Can it be used on adult, pediatric, and neonatal patients?
Yes. It is rated All Sizes, making one sensor suitable across adult, pediatric, and neonatal monitoring.
How long is the cable?
3.0 metres (9.8 feet), which gives enough reach for bedside, anesthesia cart, and transport setups.
Is this a new or refurbished sensor?
This is a brand-new sensor, backed by a 12-month warranty.
Which monitors does it work with?
It works with Datex Ohmeda and GE Healthcare monitors built to accept the 10-pin OXY-W4-N / TruSignal connector, including the Aespire, AS/3, S/5, and Cardiocap families. Always confirm your exact monitor model before ordering.
Reviews
There are no reviews yet.