BCI 1303 Infant Non-Woven Adhesive SpO2 Sensor 0.9m (Disposable Box of 24)

The BCI 1303 Infant SpO2 Sensor is a new, single-patient-use non-woven adhesive pulse oximetry sensor with a 0.9m cable and 9-pin connector, built to the BCI 1303 reference specifications for BCI (Smiths Medical) technology pulse oximeters and patient monitors. It is supplied as a box of 24 sensors and is sized for infant patients.

This is a replacement sensor that cross-references to BCI 1303.

Key Benefits of This Infant Disposable SpO2 Sensor

• Infection control: Single-patient-use design removes the need for reprocessing between patients.
• Gentle on infant skin: Soft, breathable non-woven adhesive wrap conforms to small application sites.
• Secure placement: Adhesive wrap helps hold the emitter and detector in alignment during patient movement.
• Value pack: 24 sensors per box for nurseries, paediatric wards and clinics.
• Direct fit: 9-pin connector for BCI-technology oximeters and monitors.

Features

• Patient size: Infant
• Sensor type: Non-woven adhesive wrap
• Cable length: 0.9m (approx. 3 ft)
• SpO2 technology: BCI (Smiths Medical)
• Connector: 9-pin
• Lifecycle: Disposable, single patient use

BCI 1303 Infant SpO2 Sensor Specifications

Part Number Cross-Reference

Works With These Monitors and Pulse Oximeters

• BCI: 1301, 1302, 3100, 3101, 3180, 3300, 3301, 3302, 3303, 3304 (Autocorr), 3400, 3401, 3402 (MiniCorr), 3403, 3404 (Autocorr Plus), 3444, 6100, 8400 / 8401 (Capnocheck II), 9004 (Capnocheck Plus), 9100, 9200 (Advisor), Mini Torr, Mini Torr Plus, Spectro 10, Spectro 20, SPECTRO2 / 10 / 20 / 30, SurgiVet, Vet/Ox Plus 4600
• Smiths Medical: SurgiVet V3304
• Armstrong: AD-900, AD-1000, AD-2000, AD-3000, AD-4000
• Artema S&W: Diascope
• ChoiceMMed: HCSMD400, MD300A, MD300I, MD300K1, MD300M, MMED6000DP-M3, MMED6000DP-M7, MMED6000DP-S6, MMED6000DP-SF
• CMOS Drake: models with 9-pin connectors
• Datex Ohmeda: 4700
• Digicare: Digimax 2000, Digimax 5500
• Draeger: Oxipac 2000, Oxipac 2500
• Envitec: PulsiQuant 8040
• Goldway: UT4000A
• Infinium: Oxcyon II
• Invacare: 3300nv
• Larsen & Toubro: Cosmic, Galaxy, Planet, Planet 50, Star 50, Star 55, Stellar P
• Mennen Medical: 1300
• RGB: Omicron FT, Omicron Premium
• Spacelabs: PRO2
• Venni: VI-100A, VI-200A
• Weinmann: Oxycount Mini

Always confirm your monitor’s SpO2 technology and connector before ordering.

Use Cases

• Continuous or spot-check SpO2 and pulse rate monitoring of infants
• Paediatric wards, nurseries, recovery and emergency departments
• Situations where single-patient-use sensors are preferred for cross-contamination control

Application and Care

• Apply to clean, dry skin with the emitter and detector directly opposite each other.
• Do not wrap too tightly; check the site regularly per your facility protocol.
• Single patient use only do not clean, sterilise or reuse. Discard after use.

Frequently Asked Questions

What is the BCI 1303 infant SpO2 sensor?

It is a disposable non-woven adhesive pulse oximetry sensor for infants with a 0.9m cable and 9-pin connector, used with BCI-technology pulse oximeters and monitors.

How many sensors are in a box?

Each box contains 24 individually usable disposable sensors.

Can this sensor be reused?

No. It is a single-patient-use sensor and should be discarded after use.

Which monitors does it work with?

It works with BCI-technology devices such as BCI 3300 series, 3400 series, 9004 Capnocheck Plus, 9200 Advisor, Spectro and SurgiVet models, plus the other brands listed above.

How long is the cable?

The cable is 0.9m (approximately 3 feet) long.

Related SpO2 Sensors

For the same BCI-technology monitors, see the reusable BCI 3043 All Sizes Multi-Y SpO2 Sensor 1.0m, the BCI 3444 Adult Soft Tip SpO2 Sensor 1.0m, the BCI 3444 Adult Hard Shell SpO2 Sensor 1.0m and the BCI 3078 Adult Ear Clip SpO2 Sensor 1.0m. For Nellcor OxiMax monitors, see the Nellcor MAX-I Infant Disposable SpO2 Sensor 0.9m.