The Artema S&W SL033057 adult hard shell SpO2 sensor is a new, reusable pulse oximetry finger clip probe that measures blood oxygen saturation (SpO2) and pulse rate on adult patients. It is built to the Artema S&W SL033057 reference specifications, uses Ohmeda SpO2 technology, and has a 3.0m (9.8 ft) cable ending in a purple round keyed connector that plugs directly into Artema S&W Diascope and P9301A patient monitors.
Key Benefits of This Artema SpO2 Sensor
- Direct fit for Artema S&W monitors built to the SL033057 reference, so it connects without an adapter cable.
- Lower cost per patient a reusable finger sensor that can be cleaned and reapplied instead of discarded after one use.
- Extra reach the 3.0m cable suits bedside, theatre and trolley-mounted monitor positions.
- Stable placement the rigid hard shell clip holds the optics steady on an adult fingertip.
- Quality assurance
Features of the Adult Hard Shell Pulse Oximeter Sensor
- Adult hard shell finger clip sensor housing
- Ohmeda SpO2 technology
- 3.0m (9.8 ft) cable length
- Purple round keyed monitor connector
- Reusable, multi-patient design
- Supplied as 1 sensor per bag
Technical Specifications
| Attribute | Detail |
|---|---|
| Reference / Part Number | Artema S&W SL033057 |
| Product Type | SpO2 sensor (pulse oximetry probe) |
| Patient Size | Adult |
| Sensor Type | Hard shell (finger clip) |
| Cable Length | 3.0 m (9.8 ft) |
| SpO2 Technology | Ohmeda |
| Connector | Purple round keyed plug, direct-connect |
| Lifecycle | Reusable |
| Condition | New |
| Unit | 1 pc per bag |
| Warranty | 12 Months |
Part Number Cross-Reference
This sensor is built to the reference specifications identified by the following brand and part number combinations:
| Brand | Reference Number |
|---|---|
| Artema S&W | SL033057 |
| Praymed | PSA0156-L |
| Unimed | U410-19 |
Works With These Artema S&W Monitors
- Artema S&W Diascope
- Artema S&W P9301A
Please confirm your exact monitor model and SpO2 connector before ordering.
Use Cases
- Continuous or spot-check adult SpO2 and pulse rate monitoring on Artema S&W Diascope monitors
- Replacing a worn, cracked or intermittently reading SL033057 sensor
- Keeping spare reusable SpO2 sensors on hand for biomedical and clinical engineering departments
- General ward, recovery and theatre pulse oximetry
Application and Care
- Place the clip on a clean adult fingertip with the cable running along the back of the hand.
- Wipe the housing and cable with an approved disinfectant between patients; do not immerse or autoclave.
- Keep the connector dry and inspect the clip, cable and pins before each use.
- Store loosely coiled, away from sharp bends and direct sunlight.
Frequently Asked Questions
What is the Artema S&W SL033057 SpO2 sensor used for?
It measures blood oxygen saturation (SpO2) and pulse rate on adult patients. The hard shell clip fits over a fingertip and plugs into an Artema S&W patient monitor.
Which monitors does this sensor work with?
It works with the Artema S&W Diascope and Artema S&W P9301A monitors.
What SpO2 technology does it use?
It uses Ohmeda SpO2 technology, matching the measurement technology of the Artema S&W SL033057 reference sensor.
How long is the cable?
The cable is 3.0 metres (9.8 feet) long from the finger clip to the monitor connector.
Is this sensor reusable?
Yes. It is a reusable hard shell finger sensor that can be cleaned and used across multiple patients according to your facility’s protocol.
Is it new and does it include a warranty?
Yes. The sensor is supplied brand new and is covered by a 12-month warranty.
Related SpO2 Sensors
Need a different connector or monitor brand?
See our Datex Ohmeda OXY-F4-N Adult Hard Shell SpO2 Sensor 3.0m, Datascope Adult Hard Shell SpO2 Sensor 3.0m, Draeger Infinity Adult Hard Shell SpO2 Sensor 3.0m and BCI 3044 Adult Hard Shell SpO2 Sensor 3.0m.
Reviews
There are no reviews yet.