The Nihon Kohden TL-271T SpO2 Sensor 1.6m is a new, disposable adult pulse oximetry sensor with a soft non-woven adhesive wrap and a 1.6-metre cable. It is built to the Nihon Kohden TL-271T (1.6m) / TL-271T3 reference specifications, works with Nihon Kohden SpO2 technology, and is supplied as a box of 24 single-patient-use sensors.
Key Benefits of This Adult Adhesive SpO2 Sensor
- Single-patient hygiene: Each disposable sensor is used on one patient and then discarded, supporting infection-control protocols.
- Longer 1.6m reach: The extended cable gives more freedom between the patient and the monitor than the 0.9m version.
- Gentle on skin: Breathable non-woven adhesive tape holds the sensor securely while staying comfortable during continuous monitoring.
- Ward-ready quantity: 24 sensors per box suit hospitals, clinics and day-surgery units that monitor many patients.
Features of the Nihon Kohden TL-271T Disposable Pulse Oximeter Sensor
- Adult patient size, clearly marked on the sensor
- Non-woven adhesive wrap design for fingertip application
- 1.6m (approx. 5.2 ft) integrated cable
- Nihon Kohden SpO2 technology
- Disposable, single-patient use
- Built to the TL-271T (1.6m) and TL-271T3 reference specifications
- Brand new, box of 24
Technical Specifications
| Specification | Detail |
|---|---|
| Product | Adult Non-Woven Adhesive SpO2 Sensor |
| Reference Model | Nihon Kohden TL-271T (1.6m), TL-271T3 |
| SpO2 Technology | Nihon Kohden |
| Patient Size | Adult |
| Sensor Type | Non-woven adhesive |
| Cable Length | 1.6m |
| Lifecycle | Disposable (single-patient use) |
| Pack Quantity | 24 pcs per box |
| Condition | New |
Part Number Cross-Reference
| Brand | Reference Number |
|---|---|
| Nihon Kohden | TL-271T (1.6m), TL-271T3 |
Works With
This sensor works with Nihon Kohden patient monitors and devices that use Nihon Kohden SpO2 technology and accept the TL-271T / TL-271T3 sensor. Please check the sensor connector and reference number on your current sensor before ordering, or contact us with your monitor model and we will confirm the fit.
Use Cases
- Continuous SpO2 and pulse rate monitoring of adult patients in general wards and ICU
- Operating theatres, recovery and day-surgery units
- Emergency departments and patient transport
- Clinics that prefer single-patient-use sensors for infection control
Application and Care
- Apply to a clean, dry adult finger with the emitter and detector aligned opposite each other.
- Wrap the adhesive snugly without restricting circulation, and check the site regularly.
- Do not clean, sterilise or reuse; dispose of the sensor after single-patient use.
Frequently Asked Questions
What is the Nihon Kohden TL-271T SpO2 Sensor 1.6m used for?
It is a disposable adhesive pulse oximetry sensor used to measure oxygen saturation (SpO2) and pulse rate in adult patients on monitors that use Nihon Kohden SpO2 technology.
How many sensors are in one box?
Each box contains 24 disposable adult sensors.
How long is the cable?
The cable is 1.6 metres long, which is longer than the 0.9m version of the same sensor.
Can the sensor be reused?
No. It is a single-patient-use sensor and should not be cleaned or reprocessed.
Which part numbers does it cross-reference?
Nihon Kohden TL-271T (1.6m) and TL-271T3.
Related SpO2 Sensors
Need a different size or cable length?
See the Nihon Kohden TL-271T Adult Adhesive SpO2 Sensor 0.9m, the TL-272T Pediatric Adhesive SpO2 Sensor, the TL-273T Adult/Neonate Adhesive SpO2 Sensor, the TL-274T Infant Adhesive SpO2 Sensor, or the reusable Nihon Kohden TL-201T Adult Hard Shell SpO2 Sensor 1.6m.
Reviews
There are no reviews yet.