The Novametrix adult adhesive SpO2 sensor is a disposable, single-patient-use pulse oximetry sensor with a soft non-woven adhesive wrap and a 0.9m cable. It is built to Novametrix SpO2 technology specifications and connects to Novametrix, Dixtal, Respironics, Healthdyne and Generra patient monitors to measure oxygen saturation and pulse rate in adult patients. Each box contains 24 new sensors.
Key Benefits of This Disposable Adult SpO2 Sensor
- Lower cross-contamination risk: A fresh single-patient-use sensor for each patient supports infection control protocols.
- Comfortable for longer monitoring: The soft, breathable non-woven adhesive wrap conforms to the adult finger.
- Stable placement: The adhesive wrap keeps the emitter and detector aligned, helping maintain a steady reading.
- Economical supply: 24 sensors per box suits wards, clinics and respiratory care departments.
- Clear sizing: Each sensor is printed with “ADULT” and a finger placement guide for fast, correct application.
Features of the Novametrix Adhesive Pulse Oximeter Sensor
- Non-woven adhesive wrap sensor for adult patients
- Novametrix SpO2 technology
- 0.9m (approx. 3 ft) sensor cable
- 9-pin D-sub style monitor connector
- Disposable, single-patient-use lifecycle
- Supplied as a box of 24 sensors
- Condition: New
Technical Specifications
| Specification | Detail |
|---|---|
| Product | Adult Non-Woven Adhesive SpO2 Sensor |
| SpO2 Technology | Novametrix |
| Patient Size | Adult |
| Sensor Type | Non-woven adhesive wrap |
| Cable Length | 0.9m (approx. 3 ft) |
| Connector | 9-pin D-sub style |
| Lifecycle | Disposable (single-patient use) |
| Pack Size | 24 pcs per box |
| Condition | New |
| SKU | NOV-ADULT-NW-SPO2-9PIN-0.9M |
Works With These Patient Monitors
| Brand | Models |
|---|---|
| Novametrix | 512, 513, 715, MARS |
| Respironics | 920, 920M, 920M Plus |
| Healthdyne | Tidal Wave 710Sp, Tidal Wave 715Sp |
| Generra | 710 |
| Dixtal | Monitors using Novametrix SpO2 technology |
Please confirm your monitor model and its SpO2 connector before ordering.
Use Cases for an Adult Adhesive Oximetry Sensor
- Continuous SpO2 and pulse rate monitoring on general wards and in recovery
- Respiratory care and capnography/oximetry monitoring with Novametrix and Respironics units
- Isolation rooms and infection-control settings where single-patient-use sensors are preferred
- Emergency departments, clinics and patient transport
Application and Care
- Apply to a clean, dry adult finger using the printed finger placement guide, with the emitter and detector opposite each other.
- Wrap the adhesive tabs snugly without restricting circulation.
- Check the sensor site regularly in line with your facility protocol.
- Use on one patient only and discard after use; do not reprocess or sterilise.
Frequently Asked Questions
Which monitors does the Novametrix adult adhesive SpO2 sensor work with?
It works with Novametrix 512, 513, 715 and MARS, Respironics 920, 920M and 920M Plus, Healthdyne Tidal Wave 710Sp and 715Sp, Generra 710, and Dixtal monitors that use Novametrix SpO2 technology.
How many sensors come in one box?
Each box contains 24 new adult non-woven adhesive SpO2 sensors.
Is this SpO2 sensor reusable?
No. It is a disposable sensor intended for single-patient use and should be discarded after use.
What is the cable length and connector type?
The sensor has a 0.9m (approx. 3 ft) cable with a 9-pin D-sub style connector for Novametrix-technology SpO2 inputs.
What patient size is this sensor made for?
It is sized for adult patients and is printed with “ADULT” and a finger placement guide.
What certifications does the sensor carry?
Related SpO2 Sensors
Need a reusable option for the same monitors?
See the Novametrix Adult Hard Shell SpO2 Sensor 1.0m, the Novametrix Adult Soft Tip SpO2 Sensor 1.0m and the Dixtal 8744-00 Adult Hard Shell SpO2 Sensor 1.0m. For other monitor platforms, browse the Nellcor MAX-A Adult Adhesive SpO2 Sensor 0.9m and the Datex Ohmeda SAS-AF Adult Adhesive SpO2 Sensor 0.9m.
Reviews
There are no reviews yet.