Masimo 2651 (DBI-dc3) Adult Soft Tip SpO2 Sensor 1.0m (SET Technology Reusable New)

The Masimo 2651 Adult Soft Tip SpO2 Sensor is a new, reusable silicone finger sensor with a 1.0m cable, built to the Masimo 2651 (DBI-dc3) reference specification for monitors that use Masimo SET pulse oximetry technology. It measures oxygen saturation (SpO2) and pulse rate on adult patients and is supplied with a 12-month warranty.

Key Benefits of This Adult Soft Tip Pulse Oximeter Sensor

• Comfortable for longer monitoring: The flexible soft tip boot spreads pressure evenly around the finger, which suits extended spot checks and continuous monitoring.
• Reusable design: Made to be cleaned and used again between patients, lowering the cost per use against single-patient adhesive sensors.
• Short 1.0m lead: A tidy cable length for bedside, transport and handheld oximeter use where a long lead gets in the way.
• Masimo SET technology: Made for equipment that runs Masimo SET signal processing.
• Supplied new: Covered by a 12-month warranty.

Features of the DBI-dc3 Soft Tip SpO2 Sensor

• Adult patient size
• Soft tip (silicone boot) finger sensor style
• 1.0m (approx. 3.3 ft) cable
• Reusable lifecycle
• Masimo SET SpO2 technology
• Packed 1 piece per bag

Technical Specifications

Part Number Cross-Reference

Works With

This sensor is made for pulse oximeters and patient monitors that accept the Masimo 2651 (DBI-dc3) sensor and use Masimo SET technology. Before ordering, match the reference number on your current sensor and check the connector on your monitor or patient cable. If you are unsure, send us your monitor make and model and we will confirm the fit.

Use Cases

• Continuous SpO2 and pulse rate monitoring on adult patients in wards and recovery
• Spot-check oximetry in clinics, day surgery and outpatient settings
• Bedside and transport monitoring where a short cable is preferred
• Biomedical engineering spares for Masimo SET equipped devices

Application and Care

• Place the sensor on a clean, dry finger with the fingertip fully inserted to the end of the soft tip.
• Route the cable along the back of the hand so it does not pull on the sensor.
• Check the site regularly and move the sensor to another finger during long monitoring sessions.
• Clean and disinfect between patients following your facility protocol. Do not autoclave or immerse the connector.
• Inspect the cable and boot for damage before each use.

Frequently Asked Questions

What is the Masimo 2651 (DBI-dc3) sensor?

2651 is the Masimo reference number for the DBI-dc3 adult soft tip reusable SpO2 sensor. This product is a new sensor built to that reference specification, with a 1.0m cable and Masimo SET technology.

Is this adult soft tip SpO2 sensor reusable?

Yes. It is a reusable sensor made to be cleaned and used on multiple patients.

What patient size is it for?

It is specified for adult patients.

How long is the cable?

The cable is 1.0m long, which is about 3.3 ft.

Which SpO2 technology does it use?

It is made for equipment that uses Masimo SET pulse oximetry technology. It is not intended for Nellcor OxiMax or Philips FAST ports.

What is the difference between the Masimo 2651 and the Masimo 2652?

Both are adult soft tip reusable sensors. The 2651 (DBI-dc3) has a 1.0m cable, while the 2652 (DB-I-dc8) has a 3.0m cable. Choose the length that suits your setup.

Does it come with a warranty?

Yes, it is supplied new with a 12-month warranty.

Related SpO2 Sensors

Need a different cable length or connector?

See the Masimo 2652 Adult Soft Tip SpO2 Sensor 3.0m, the Masimo 2643 Adult Soft Tip SpO2 Sensor 1.0m, the Masimo 4052 RD SET DBI Adult Soft Tip Sensor 1.0m, the Masimo 1269 LNOP Adult Soft Tip Sensor 1.0m and the Masimo 2644 DBI-DC12 Adult Soft Tip Sensor 3.6m.