Masimo 2507 M-LNCS DB-I Adult Soft Tip SpO2 Sensor 1.0m (Reusable New)

The Masimo 2507 M-LNCS DB-I adult soft tip SpO2 sensor is a reusable silicone finger sensor with a 1.0m cable that measures blood oxygen saturation (SpO2) and pulse rate on patient monitors using Masimo M-LNCS technology. It is supplied new, built to the Masimo 2507 (M-LNCS DB-I) reference specifications, and is intended for adult patients.

Key Benefits of This Adult Soft Tip Pulse Oximeter Sensor

• Comfortable for longer monitoring: The flexible soft tip boot has no spring, so pressure on the finger stays low.
• Reusable and economical: A multi-patient sensor that can be wiped clean between uses, lowering cost per patient.
• Direct M-LNCS connection: Plugs into monitors and patient cables with a Masimo M-LNCS sensor port.
• Convenient 1.0m lead: A short cable that reduces tangling at the bedside and during transport.
• Warranty backed: Supplied new with a 12-month warranty.

Features of the M-LNCS DB-I Reusable SpO2 Finger Sensor

• Adult soft tip (silicone boot) finger sensor
• Masimo M-LNCS SpO2 technology
• 1.0m (approx. 3.3 ft) cable length
• Reusable, multi-patient design
• Packed 1 piece per bag

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

• Masimo: Radius-7
• Biolight: BLT A6, BLT A8, M8500, Q3, Q6, Q7

Please confirm that your monitor or patient cable has a Masimo M-LNCS sensor port before ordering. M-LNCS and LNCS connectors are different and do not interchange.

Use Cases

• Continuous SpO2 and pulse rate monitoring of adult patients in wards, ICU and recovery
• Spot-check oximetry in clinics, day surgery and emergency departments
• Patient transport where a short, tidy sensor lead is preferred
• Biomedical engineering spares for M-LNCS equipped monitors

Application and Care

• Slide the adult finger fully into the soft tip so the fingertip sits over the sensor window.
• Route the cable along the back of the hand and check the site regularly during long monitoring periods.
• Wipe clean between patients following your facility’s protocol; do not immerse or autoclave.
• Inspect the boot and cable before each use and remove from service if damaged.

Frequently Asked Questions

What is the Masimo 2507 M-LNCS DB-I sensor used for?

It is a reusable adult soft tip finger sensor used to measure oxygen saturation (SpO2) and pulse rate on monitors with Masimo M-LNCS technology.

Is this adult soft tip SpO2 sensor reusable?

Yes. It is a reusable, multi-patient sensor that can be wiped clean between patients.

How long is the cable?

The cable is 1.0m long, approximately 3.3 feet.

Which monitors does this M-LNCS soft tip sensor work with?

It works with M-LNCS equipped monitors including Masimo Radius-7 and Biolight BLT A6, BLT A8, M8500, Q3, Q6 and Q7.

What is the difference between M-LNCS and LNCS sensors?

Both use Masimo sensor technology, but the connectors differ. An M-LNCS sensor only fits an M-LNCS port, so check the connector on your monitor or patient cable first.

Which part numbers does this sensor cross-reference to?

Masimo 2507 (M-LNCS DB-I), Draeger MP03207, GE Healthcare 2068423-063, Unimed U403S-203 and Praymed PSC0426-S.

Does the sensor come with a warranty?

Yes. It is supplied new with a 12-month warranty.

Related SpO2 Sensors

Need a different style in the same M-LNCS family?

See the Masimo 2501 M-LNCS DCI Adult Hard Shell SpO2 Sensor, the Masimo 2503 M-LNCS TC-I Adult Ear Clip SpO2 Sensor 1.0m, the Masimo 2502 M-LNCS DCIP Pediatric Soft Tip SpO2 Sensor 1.0m and the Masimo 2505 M-LNCS YI Multi-Y SpO2 Sensor 1.0m. For Rainbow 20-pin monitors, see the Masimo 2643 Adult Soft Tip SpO2 Sensor 1.0m.