Infinium Omni Adult Hard Shell SpO2 Sensor 3.0m (Nellcor Oxismart 6 Pin Reusable New)

The Infinium Omni Adult Hard Shell SpO2 Sensor is a new, reusable finger clip pulse oximetry sensor with a 3.0m (9.8ft) cable and a 6-pin round connector. It is built to Nellcor Oxismart reference specifications and works with Infinium Omni and Infinium One patient monitors, DRE Waveline series monitors and the Pace Tech Vitalmax 4000. It measures blood oxygen saturation (SpO2) and pulse rate on adult patients and cross-references to Unimed U410-137 and Praymed PSA0432-L.

Key Benefits of This Infinium SpO2 Finger Sensor

• Direct connection: The 6-pin round plug connects straight to the monitor’s SpO2 port, with no separate adapter cable needed.
• 3.0m reach: A long one-piece cable gives freedom of movement between bed and monitor in theatre, recovery and ward settings.
• Reusable design: The rigid hard shell clip can be cleaned between patients, lowering cost per use compared with disposable sensors.
• Fast application: The spring-loaded clip is placed on the finger in seconds, ideal for spot checks and continuous monitoring.
• Peace of mind:

Features

• Adult hard shell (finger clip) sensor style
• Nellcor Oxismart SpO2 technology (non-OxiMax)
• 3.0m / 9.8ft one-piece cable
• 6-pin round push-pull monitor connector
• Reusable design for multi-patient use
• Supplied new, 1 piece per bag

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

Monitors in the same family can be fitted with different SpO2 modules. Please confirm your monitor uses Nellcor Oxismart technology and a 6-pin round SpO2 port before ordering.

Use Cases

• Continuous SpO2 and pulse rate monitoring in operating theatres, recovery and general wards
• Spot-check oximetry in clinics, day surgery and outpatient settings
• Replacement of a worn, damaged or lost finger sensor on Infinium, DRE and Pace Tech monitors
• Spare sensor stock for biomedical engineering departments

Application and Care

• Place the clip on the index, middle or ring finger with the cable running along the back of the hand.
• Remove nail polish and keep the site clean and dry for a reliable reading.
• Check the sensor site regularly and move the sensor to another finger during long monitoring periods.
• Wipe the sensor and cable with a soft cloth dampened with 70% isopropyl alcohol between patients. Do not soak, immerse or autoclave.

Frequently Asked Questions

Which monitors does this Infinium adult SpO2 sensor work with?

It works with Infinium Omni and Infinium One monitors, DRE Waveline, Waveline Pro and Waveline Touch monitors, and the Pace Tech Vitalmax 4000, where the monitor uses Nellcor Oxismart SpO2 technology and a 6-pin round sensor port.

Is this an Oxismart or an OxiMax sensor?

This is a Nellcor Oxismart (non-OxiMax) sensor. It will not work on monitors fitted with a Nellcor OxiMax module, which need an OxiMax sensor instead.

What part numbers does this sensor cross-reference to?

It cross-references to Unimed U410-137 and Praymed PSA0432-L.

How long is the cable and do I need an adapter cable?

The cable is 3.0m (9.8ft) long and plugs directly into the monitor, so no extension or adapter cable is required.

Is the sensor reusable?

Yes. It is a reusable hard shell finger clip sensor that can be wiped clean and disinfected between patients.

What patient size is it for?

It is designed for adult patients. The finger clip is not suitable for infants or neonates.

Does it come with a warranty?

Yes, the sensor is supplied new with a 12-month warranty.

Related SpO2 Sensors

Need a different connector or technology?

See the Infinium P02111 Adult Hard Shell SpO2 Sensor 3.0m for Omni III and Infitron II monitors, the Infinium OxiMax Adult Hard Shell SpO2 Sensor 3.0m for OxiMax-equipped monitors, the Nellcor DS100A Adult Hard Shell SpO2 Sensor 3.0m Oxismart with a 9-pin connector, or the Nellcor FlexMax Adult Soft Tip SpO2 Sensor 3.0m for a softer silicone fit.