The Infinium P02111 SpO2 sensor is a reusable adult hard shell finger clip pulse oximetry probe with a 3.0 m (9.8 ft) cable, built to the Infinium P02111 reference specifications and using Nellcor Oxismart SpO2 technology.
It connects directly to Infinium Omni III and Infitron II patient monitors and DRE Waveline Pro, Waveline Touch and Waveline EZ monitors to deliver continuous oxygen saturation (SpO2) and pulse rate readings for adult patients.
Key Benefits of the Infinium P02111 Reusable SpO2 Sensor
- Lower cost per patient: A durable, reusable design replaces repeated purchases of single-use adhesive probes.
- Direct plug-in connection: No adapter cable required on Infinium Omni III, Infitron II and DRE Waveline monitors.
- Extra reach at the bedside: The 3.0 m cable gives clinicians flexible monitor placement in ICU, ward, OR and transport settings.
- Consistent readings: Nellcor Oxismart signal technology supports stable SpO2 and pulse rate measurement during routine monitoring.
- Quality assured:
Features of the Adult Hard Shell Finger Clip SpO2 Probe
Rigid Hard Shell Housing
The impact-resistant hard shell clip protects the LED emitter and photodetector, holding them in precise alignment across the fingertip for dependable light transmission.
Spring-Loaded Finger Clip
A spring-hinged clip with soft internal pads applies gentle, even pressure, allowing quick application and repositioning for spot checks or continuous monitoring.
Round Multi-Pin Monitor Connector
The round blue connector with an orange alignment marker plugs straight into the SpO2 port of supported Infinium and DRE monitors for fast set-up.
Strain-Relieved 3.0 m Cable
A flexible grey patient cable with molded strain relief at the sensor and connector ends resists kinking and cable fatigue during daily use and cleaning.
Specifications : Infinium P02111 SpO2 Sensor
| Specification | Details |
|---|---|
| Reference Part Number | Infinium P02111 |
| Cross-Reference | Unimed U410-213 |
| Sensor Type | Hard Shell Finger Clip |
| Patient Size | Adult |
| SpO2 Technology | Nellcor Oxismart |
| Cable Length | 3.0 m (9.8 ft) |
| Lifecycle | Reusable |
| Packaging | 1 piece per bag |
| Warranty | 12 Months |
| Condition | New |
Cross-Reference Part Numbers
| Brand | Reference Number |
|---|---|
| Infinium | P02111 |
| Unimed | U410-213 |
Works With These Patient Monitors
| Monitor Brand | Models |
|---|---|
| Infinium Medical | Omni III, Infitron II |
| DRE Medical | Waveline Pro, Waveline Touch, Waveline EZ |
Please confirm your monitor model and SpO2 connector before ordering. Brand names and model numbers are used for identification purposes only.
Clinical Use Cases for an Adult Finger Clip SpO2 Sensor
- Continuous SpO2 and pulse rate monitoring in ICU, CCU and high-dependency units
- Pre-operative, intra-operative and PACU patient monitoring
- Emergency department triage and general ward observations
- Outpatient clinics, surgical centres and day procedure units
Application and Care
- Place the patient’s index, middle or ring finger fully into the clip so the fingertip reaches the finger stop and the cable runs along the back of the hand.
- Avoid sites with nail polish, artificial nails or restricted circulation; reposition the sensor every 4 hours for extended monitoring.
- Clean between patients by wiping with 70% isopropyl alcohol or a mild detergent solution; allow to dry fully before reuse.
- Do not immerse, autoclave or gas-sterilise the sensor or connector.
- Inspect the cable and clip regularly and replace if damaged.
Frequently Asked Questions
What is the Infinium P02111 SpO2 sensor used for?
It is a reusable adult finger clip probe that measures blood oxygen saturation (SpO2) and pulse rate when connected to Infinium Omni III, Infitron II and DRE Waveline patient monitors.
Which monitors does this adult hard shell SpO2 sensor work with?
It works with Infinium Omni III and Infitron II monitors and DRE Waveline Pro, Waveline Touch and Waveline EZ monitors that use Nellcor Oxismart SpO2 technology.
Is this SpO2 sensor reusable?
Yes. The hard shell finger clip is designed for repeated use and can be cleaned with 70% isopropyl alcohol between patients.
How long is the cable on the P02111 SpO2 probe?
The integrated patient cable is 3.0 m (approximately 9.8 ft) long, connecting directly to the monitor without an extension cable.
Can this sensor be used on children or neonates?
No. This probe is sized for adult patients. Pediatric, infant and neonatal patients require a size-specific sensor.
What cross-reference numbers match this sensor?
This sensor matches Infinium reference P02111 and Unimed reference U410-213.
Does the sensor come with a warranty?
Yes.
Related SpO2 Sensors
Looking for other Oxismart probes or a different sensor style?
Browse the Nellcor Oxismart Adult Hard Shell SpO2 Sensor 3.0m, the Nellcor DS100A Adult Hard Shell SpO2 Sensor 3.0m (Oxismart), the Nellcor D-YSE Adult Ear Clip SpO2 Sensor 1.0m, the Datascope Adult Hard Shell SpO2 Sensor 3.0m and the Criticare CSI 934-10DN Adult Finger Clip SpO2 Sensor 3.0m.
Reviews
There are no reviews yet.