The GE OxyTip+ Adult Hard Shell SpO2 Sensor 1.0m is a new, reusable finger-clip pulse oximetry sensor. The hard-shell clip positions the emitter and detector over an adult fingertip and connects to the monitor through an 8-pin direct-connect plug at the end of a 1.0-metre cable, delivering continuous SpO2 and pulse-rate readings on GE Healthcare and Datex-Ohmeda patient monitors.
Key Features of GE OxyTip+ Adult Hard Shell SpO2 Sensor
- Hard-shell spring clip holds the sensor securely on an adult finger during monitoring
- 8-pin direct-connect plug — no adapter cable needed on OxyTip-ready monitor ports
- Reusable housing lowers cost-per-patient compared with disposable sensors
- 1.0m (3.3ft) cable reaches comfortably from bedside monitors to the patient
- Supplied as new stock with a 12-month warranty
8-Pin Connector for GE OxyTip / TruSat Monitor Ports
Connector Details
- 8-pin blue rectangular direct-connect plug matching the GE Healthcare OXY-F-UN / Datex-Ohmeda TruSat sensor port
- Secure pin engagement for a stable, consistent SpO2 waveform
- Works directly with OxyTip-enabled monitor ports — no adapter required
Technical Specifications of GE OxyTip+ Adult Hard Shell SpO2 Sensor
| Product Name | GE OxyTip+ Adult Hard Shell SpO2 Sensor |
| Model / Reference | OXY-F-UN (GE Healthcare OxyTip+ sensor interface) |
| Patient Size | Adult |
| Sensor Type | Hard shell (finger clip) |
| SpO2 Technology | GE OxyTip+ |
| Connector Type | 8-pin direct-connect |
| Cable Length | 1.0m / 3.3ft |
| Lifecycle | Reusable |
| Condition | New |
| Warranty | 12 Months |
Cross-Reference / Part Numbers
| Brand | Reference Number |
| GE Healthcare | OXY-F-UN |
| Datex-Ohmeda | 6051-0000-110 |
| Envitec | F-3003-9 |
| Unimed | U403-127 |
Monitor Fitment
This sensor works with GE Healthcare and Datex-Ohmeda patient monitors equipped with an OxyTip+/TruSat-style 8-pin SpO2 port, including:
- Datex-Ohmeda: 3755, 37xx Series, 3800, 3900, 3900P, 4700, 5250, AS/3 (with M-OSAT module), Biox 3700, Cardiocap AS/3 (N-XOSAT or Masimo), Cardiocap S/5, Cardiocap/5, CS/3 (with M-OSAT module), E-PRESTN, i4 (with E-series modules), S/5 (with E-series or M-OSAT module), TruSat, TruSat TD, TruSignal, TuffSat
- GE Healthcare: 259, Aisys, Aisys CS2, Carescape B650, Carescape V100
Use Cases
- General ward and bedside adult patient monitoring
- Operating room and anesthesia monitoring on Aisys/Aisys CS2 systems
- Emergency departments and post-operative recovery units
- Biomedical equipment suppliers refreshing OxyTip+ sensor inventory
Care & Maintenance
- Wipe the sensor housing with a soft cloth and manufacturer-approved disinfectant between patients
- Do not immerse the connector or cable in liquid
- Inspect the clip spring and cable jacket regularly for wear before each use
- Store away from direct sunlight and extreme temperatures when not in use
Frequently Asked Questions
What monitors does GE OxyTip+ Adult Hard Shell SpO2 Sensor work with?
It works with GE Healthcare and Datex-Ohmeda monitors that use an 8-pin OxyTip+/TruSat-style SpO2 sensor port, including the Aisys, Aisys CS2, Carescape B650/V100, and the Datex-Ohmeda S/5 and CS/3 families listed above.
Is this sensor new or refurbished?
It is supplied as new stock.
How long is the cable?
The cable measures 1.0 metre (approximately 3.3ft).
Can this sensor be reused on multiple patients?
Yes. It is a reusable hard-shell sensor intended for repeated clinical use, following your facility’s standard cleaning and disinfection protocol between patients.
Related SpO2 Sensors
See our Nellcor D-YSPD pediatric hard-shell SpO2 sensor, the Philips M1191BL adult soft tip SpO2 sensor 3.0m, the Masimo 2053 adult hard-shell SpO2 sensor 1.0m (Rainbow), the Masimo 4050 RD Set DCI short adult clip, or the Nellcor adult ear clip SpO2 sensor, 9-pin OxiMax.
Reviews
There are no reviews yet.