This adult hard shell SpO2 sensor is cost-effective alternative to the Masimo 2053 (Red DCI-DC3) finger sensor, built to work with Masimo Rainbow-enabled patient monitors. It delivers continuous SpO2 and pulse rate monitoring for adult patients in hospitals, clinics, ambulances, and home-care settings, and reuses across patients when properly cleaned between uses.
The sensor clips onto an adult fingertip and uses Rainbow-technology light-based measurement to continuously track blood oxygen saturation (SpO2) and pulse rate. It is designed for SpO2 and pulse readings only it does not measure SpCO or SpMet.
Key Benefits
- Hard shell finger clip design stays securely positioned during extended monitoring
- Reusable construction reduces per-patient consumable costs versus disposable sensors
- 1.0m cable gives adequate reach between the patient and monitor without excess slack
- Rainbow-technology signal processing supports stable readings for adult patients
- Backed by a 12-month warranty against manufacturing defects
Features & Specifications
Every feature of this sensor is built around dependable adult SpO2 monitoring and easy integration into existing Rainbow-supported monitoring systems.
Hard Shell Finger Clip
The rigid hard shell clip maintains consistent sensor-to-skin contact, helping to minimise signal dropout compared to soft wrap-style sensors.
1.0m Cable Length
A 1.0 metre (approximately 3.3 ft) cable connects the sensor to the supported adapter cable or monitor input, suitable for bedside and point-of-care monitoring.
Rainbow Technology Fitment
Specifications
| Specification | Detail |
|---|---|
| Cross-Reference | Masimo 2053 (Red DCI-DC3); Masimo 2201 (SpO2 only) |
| Sensor Type | Hard shell finger clip |
| Patient Size | Adult |
| Cable Length | 1.0m (approx. 3.3 ft) |
| Technology | Rainbow |
| Lifecycle | Reusable |
| Measurement Parameters | SpO2 and pulse rate only (does not read SpCO or SpMet) |
| Unit | 1 pcs/bag |
| Condition | New |
| Warranty | 12 months |
Fitment
This sensor is designed to be fits equipment from the following OEM brands and models. Always confirm your monitor model and connector type before ordering.
- Masimo: Pronto, Pronto 7, Pronto with Next Generation SpHb, Rad-5, Rad-57, Rad-57c, Rad-57cm, Rad-57m, Rad-5v, Rad-8, Rad-87, Rad-97, Rad-97 NIBP, Rad-97 with NomoLine Capnography, Radical-7, Radical (20 pin)
- Physio-Control: Lifepak 15
- Zoll: X Series
- Comen: K12 Pro
Use Cases
Hospital & ICU Monitoring
Continuous SpO2 monitoring for adult patients in intensive care, recovery, and general ward settings.
Emergency & Ambulance Use
Reliable oxygen saturation readings during patient transport and emergency response.
Outpatient & Clinic Settings
Spot-check and short-term SpO2 monitoring during outpatient procedures and consultations.
Care & Maintenance
- Wipe down or disinfect between patients following your facility’s infection-control protocol
- Inspect the cable and clip for wear or damage before each use
- Avoid harsh solvents that can degrade the housing or cable insulation
- Store in a clean, dry area away from direct sunlight when not in use
Frequently Asked Questions
Can this sensor be reused across multiple patients?
Yes. It is a reusable sensor and can be used on multiple patients when cleaned and disinfected according to your facility’s protocol between uses.
What does the cable length measure?
The cable measures 1.0 metre (approximately 3.3 feet) from the sensor clip to the connector end.
Does this sensor measure carbon monoxide (SpCO) or methemoglobin (SpMet)?
No. This sensor provides SpO2 and pulse rate readings only.
What patient size is this sensor designed for?
This sensor is designed for adult patients.
Is a warranty included?
Yes, this sensor is covered by a 12-month warranty against manufacturing defects.
Which monitors is this sensor fits?
It is designed to be fits select Masimo Rainbow-enabled monitors, Physio-Control Lifepak 15, Zoll X Series, and Comen K12 Pro. Confirm your specific monitor model before ordering.
Reviews
There are no reviews yet.