The Adult Hard Shell SpO2 Sensor 1.0m is a reusable pulse oximetry finger sensor built to the fit, form, and function of the GE Healthcare TS-F1-H reference (cross-referenced to Datex-Ohmeda 6051-6000-155, Ohmeda OXY-F1-H, and Unimed U403-02). It clips onto an adult fingertip and connects through a 1.0-meter cable to Datex-Ohmeda and GE Healthcare CARESCAPE patient monitors for continuous SpO2 and pulse-rate monitoring.
Key Benefits
- Hard shell finger clip design stays securely positioned during extended monitoring
- Reusable construction lowers per-patient consumable costs versus disposable sensors
- 1.0m cable gives adequate reach between the patient and monitor without excess slack
- Ohmeda-technology signal processing supports stable adult SpO2 and pulse-rate readings
- Backed by a 12-month warranty against manufacturing defects
Features & Specifications
Every feature of this sensor is built around dependable adult SpO2 monitoring and straightforward integration with Datex-Ohmeda and GE Healthcare monitoring systems.
Hard Shell Adult Finger Clip
The rigid hard-shell clip maintains consistent sensor-to-skin contact, helping minimise signal dropout compared with soft wrap-style sensors.
1.0m Cable Length
A 1.0-meter (approximately 3.3 ft) cable connects the sensor directly to the monitor input, suitable for bedside and point-of-care monitoring.
Ohmeda SpO2 Technology
Engineered to the reference of the GE Healthcare TS-F1-H / Ohmeda OXY-F1-H sensor family, this sensor uses Ohmeda-type signal processing for continuous oxygen saturation and pulse-rate data.
Specifications
| Specification | Detail |
|---|---|
| Reference Numbers | GE Healthcare TS-F1-H; Datex-Ohmeda 6051-6000-155; Ohmeda OXY-F1-H; Unimed U403-02 |
| Sensor Type | Hard shell finger clip |
| Patient Size | Adult |
| Cable Length | 1.0m (approx. 3.3 ft) |
| SpO2 Technology | Ohmeda |
| Lifecycle | Reusable |
| Unit | 1 pcs/bag |
| Condition | New |
| Warranty | 12 months |
Fitment
This sensor is built to work with patient monitors from the following OEM brands. Always confirm your exact monitor model and connector before ordering.
- Datex-Ohmeda: 3700, 3710, 3740, 3770, 3775, 37xx Series, 3800, 3900, 3900P, 4700, 5250 respiratory gas monitors, 5250 RGM
- GE Healthcare: CARESCAPE ONE, CARESCAPE V100
Use Cases
Hospital & ICU Monitoring
Continuous SpO2 monitoring for adult patients in intensive care, recovery, and general ward settings.
Emergency & Ambulance Use
Reliable oxygen saturation readings during patient transport and emergency response.
Outpatient & Clinic Settings
Spot-check and short-term SpO2 monitoring during outpatient procedures and consultations.
Care & Maintenance
- Wipe down or disinfect between patients following your facility’s infection-control protocol
- Inspect the cable and clip for wear or damage before each use
- Avoid harsh solvents that can degrade the housing or cable insulation
- Store in a clean, dry area away from direct sunlight when not in use
Frequently Asked Questions
Can this sensor be reused across multiple patients?
Yes. It is a reusable sensor and can be used on multiple patients when cleaned and disinfected according to your facility’s protocol between uses.
What does the cable length measure?
The cable measures 1.0 metre (approximately 3.3 feet) from the sensor clip to the connector end.
Which monitors is this sensor designed for?
It is built to the fit, form, and function of the GE Healthcare TS-F1-H / Datex-Ohmeda 6051-6000-155 / Ohmeda OXY-F1-H reference, for use with Datex-Ohmeda 3700-5250 series monitors and GE Healthcare CARESCAPE ONE and CARESCAPE V100 monitors. Confirm your specific monitor model before ordering.
What patient size is this sensor designed for?
This sensor is designed for adult patients.
Is a warranty included?
Yes, this sensor is covered by a 12-month warranty against manufacturing defects.
Is this sensor new or used?
This sensor is supplied new.
Reviews
There are no reviews yet.