The Adult Hard Shell SpO2 Sensor 1.0m is a new, reusable adult finger-clip pulse oximetry sensor built to the Masimo 1396 (DCSC) and S402-150 reference, using Masimo SET signal-processing technology. It connects through a 1.0-meter cable and is designed to deliver continuous blood oxygen saturation (SpO2) and pulse rate readings on DCSC-supported patient monitors from brands including Datascope, GE Healthcare, Mindray, Physio-Control, Welch Allyn, and Zoll.
Key Features & Benefits
- Hard shell adult finger clip built to the Masimo 1396 (DCSC) / S402-150 connector reference
- Masimo SET signal-processing technology supports motion-tolerant SpO2 and pulse readings
- 1.0m cable length suits close bedside and point-of-care connections
- Reusable construction lowers per-patient sensor costs compared with disposables
- Cross-referenced to CASMed, Physio-Control, Unimed, and Zoll part numbers for easy sourcing
Product Overview
Hard Shell Finger Clip Design
The rigid hard shell clip holds the sensor securely on an adult fingertip, helping maintain consistent skin contact and reducing signal dropout during extended monitoring.
Masimo SET Technology
Masimo SET signal processing is designed to deliver stable SpO2 and pulse rate readings even during patient motion and low-perfusion conditions on supported monitors.
1.0m Cable Length
A 1.0 metre (approximately 3.3 ft) cable connects the sensor directly to a DCSC-supported monitor input, suitable for bedside and point-of-care use.
Technical Specifications
| Specification | Detail |
|---|---|
| Reference / Model Number | Masimo 1396 (DCSC), S402-150 |
| Sensor Type | Hard shell finger clip |
| Patient Size | Adult |
| Cable Length | 1.0m (approx. 3.3 ft) |
| SpO2 Technology | Masimo SET |
| Lifecycle | Reusable |
| Unit | 1 pcs/bag |
| Condition | New |
| Warranty | 12 Months |
Cross-Reference Part Numbers
| Brand | Reference Number |
|---|---|
| CASMed | 01-02-0700 |
| Masimo | 1396 (DCSC), S402-150 |
| Physio-Control | 11171-000051 |
| Unimed | U403-15R |
| Zoll | 8000-0037 |
supported Monitors & Equipment
This sensor is designed to be fits equipment from the following OEM brands and models. Always confirm your monitor model and connector type before ordering.
- Atom: V-2100G
- Bitmos: sat 800, sat 801, sat 805, sat 816, satPuls
- Comen: C60
- Datascope: Accutor V, Accutorr Plus, Accutorr Plus with Masimo Rainbow Option, EPM4, Passport 2 with Masimo Rainbow Option, Passport 2LT, Passport 2LT with Masimo Rainbow Option, Passport XG, Passport XG with Masimo Rainbow Option, T8, V12, V21
- GE Healthcare: Dinamap ProCare with Masimo Pro 1000, Pro 300V2, ProCare 300, ProCare Auscultatory 400, ProSeries V2, V300
- Invivo: Escort II OPT30 Prism
- Masimo: Bitmos 901 M, Bitmos 901 ML, Bitmos Sat 801, Pronto 7, Rad 5, Rad 57, Rad 5v, Rad 87, Rad 9, Rad-8, Radical, Radical-7
- Mindray: Accutorr V, Duo, Duo with Masimo Option, Passport 2, Passport 2 with Masimo Option, Passport V, Passport V with Masimo Option, Spectrum, Spectrum OR, Spectrum OR with Masimo Option, Spectrum with Masimo Option, Trio, Trio with Masimo Option, V12 with Masimo Option, V21 with Masimo Option
- Physio-Control: Lifepak 11, Lifepak 12, Lifepak 15, Lifepak 20, Lifepak 20E
- Respironics: Alice 5
- Welch Allyn: 45NE0-E1 LX, 53STP, Propaq CS, Spot Vital Signs 42MTB-E1, Spot Vital Signs LXi
- Zoll: E Series, M Series, R Series
Use Cases
Hospital & ICU Monitoring
Continuous SpO2 monitoring for adult patients in intensive care, recovery, and general ward settings.
Emergency & Transport Care
Reliable oxygen saturation readings during patient transport and emergency response on DCSC-supported monitors.
Outpatient & Clinic Settings
Spot-check and short-term SpO2 monitoring during outpatient procedures and consultations.
Care & Maintenance
- Wipe down or disinfect between patients following your facility’s infection-control protocol
- Inspect the cable and clip for wear or damage before each use
- Avoid harsh solvents that can degrade the housing or cable insulation
- Store in a clean, dry area away from direct sunlight when not in use
Frequently Asked Questions
What is the Masimo 1396 DCSC SpO2 sensor used for?
It non-invasively measures a patient’s blood oxygen saturation (SpO2) and pulse rate, clipped onto an adult fingertip and connected to a DCSC-supported patient monitor.
Is this sensor reusable?
Yes. It is a reusable sensor designed for repeated use on multiple patients when cleaned and disinfected according to your facility’s protocol between uses.
What cable length does this sensor have?
This listing has a 1.0-meter (approximately 3.3 ft) cable from the sensor clip to the connector.
Which monitors is this sensor fits?
It is built to the Masimo 1396 (DCSC) / S402-150 reference used across Datascope, GE Healthcare, Mindray, Physio-Control, Welch Allyn, Zoll, and other DCSC-supported monitor platforms. Confirm your specific monitor model before ordering.
Is a warranty included?
Yes, this sensor is covered by a 12-month warranty against manufacturing defects.
What condition is this sensor supplied in?
This sensor is supplied new.
Related SpO2 Sensors
Complete your patient-monitoring setup with our Masimo 2053 Adult Hard Shell SpO2 Sensor 1.0m, Masimo 4050 RD Set DCI Short SpO2 Adult Clip, Philips 8-Pin Reusable SpO2 Sensor, Philips M1194B Adult Ear Clip SpO2 Sensor, and Philips M1191BL Adult Soft Tip SpO2 Sensor.
Reviews
There are no reviews yet.