The Philips M1191B SpO2 sensor listed here is a new, reusable large adult soft tip pulse oximetry sensor with a 2.0m cable and an 8 pin Philips FAST connector. It is built to the Philips M1191B / M1191A (Large) reference specifications and measures blood oxygen saturation (SpO2) and pulse rate on Philips IntelliVue, SureSigns, HeartStart and Avalon equipment that uses Philips FAST SpO2 technology.
Key Benefits of This Large Adult SpO2 Finger Sensor
- Sized for larger fingers: The large adult soft tip suits patients whose fingers are too broad for a standard adult sensor.
- Comfortable for longer monitoring: The flexible soft tip boot has no spring hinge, so it sits gently on the finger.
- Direct connection: The 8 pin FAST plug connects to supported Philips monitors and modules.
- Reusable and economical: Can be cleaned and used again across many patients, lowering cost per use.
- Practical 2.0m reach: Enough cable length for bedside, transport and theatre set-ups without excess slack.
- Peace of mind: Supplied new with a 12 month warranty.
Features
- Patient size: Large Adult
- Sensor style: Soft Tip (silicone finger boot)
- SpO2 technology: Philips FAST
- Connector: 8 pin Philips FAST plug
- Cable length: 2.0m (approx. 6.6 ft)
- Lifecycle: Reusable
Philips M1191B SpO2 Sensor Specifications
| Specification | Detail |
|---|---|
| Reference Part Number | Philips M1191B, M1191A (Large) |
| SKU | PHI-M1191B-SPO2-ST-8P-2M |
| Product Type | Reusable SpO2 Sensor |
| Patient Size | Large Adult |
| Sensor Type | Soft Tip |
| SpO2 Technology | Philips FAST |
| Connector | 8 Pin |
| Cable Length | 2.0m (approx. 6.6 ft) |
| Lifecycle | Reusable |
| Condition | New |
| Unit | 1 pc per bag |
| Warranty | 12 Months |
Part Number Cross-Reference
| Brand | Reference Number |
|---|---|
| Philips | M1191B, M1191A (Large) |
Works With These Monitors
Philips
- IntelliVue: MP2, MP5, MP5SC, MP5T, MP20, MP20 Junior, MP30, MP40, MP50, MP60, MP70, MP80, MP90, MX100, MX400, MX430, MX450, MX500, MX550, MX600, MX700, MX800, X2, X3, XG50, FAST-SpO2 modules
- SureSigns: VM1, VM4, VM6, VM8, VS2, VS2+, VS3, VS4, VSi
- HeartStart defibrillators: MRx, XL, XLT, 4000, Heartstream XL, Codemaster 100
- Avalon fetal monitors: FM20, FM30, FM40, FM50
- Modules and legacy models: M1020A, M1020B, M3000A, M3001A, M3002A (MMS X2), M3046A (M3/M4), M8102A, M8105A, C1, C3, Viridia 24C, Agilent Series 50XM, TRx M4841A, TRx 4851A
Other Brands
- Goldway: G40
- Mindray: V12
- Solaris: NT2A, NT2C
Please confirm your monitor has an 8 pin Philips FAST SpO2 input before ordering.
Use Cases
- Spot-check and continuous SpO2 monitoring of large adult patients
- General wards, ICU, emergency, recovery and operating theatres
- Patient transport with IntelliVue X2 / X3 and HeartStart MRx
- Biomedical engineering spares and stock for Philips monitor fleets
Application and Care
- Slide the soft tip over the finger so the light emitter sits over the nail bed.
- Route the cable along the back of the hand and avoid tight bends near the connector.
- Wipe clean and disinfect between patients following your facility protocol; do not autoclave or immerse the connector.
- Inspect the cable and boot before each use and remove from service if damaged.
Frequently Asked Questions
What is the Philips M1191B SpO2 sensor?
It is a reusable large adult soft tip pulse oximetry sensor with a 2.0m cable and 8 pin connector, used to measure oxygen saturation and pulse rate on monitors with Philips FAST SpO2 technology.
Which monitors does this sensor work with?
It works with Philips IntelliVue MP and MX series, SureSigns VM and VS series, HeartStart MRx and XL defibrillators, Avalon FM fetal monitors, and Goldway G40, Mindray V12 and Solaris NT2A / NT2C.
How long is the cable?
The cable is 2.0 metres, approximately 6.6 feet.
Who is the large adult size for?
It is intended for adult patients with larger fingers where a standard adult soft tip sensor is too tight.
Is this sensor new?
Yes. It is supplied brand new with a 12 month warranty.
Can it be reused on multiple patients?
Yes. It is a reusable sensor and should be cleaned and disinfected between patients.
What is the difference between a soft tip and a hard shell sensor?
A soft tip sensor is a flexible silicone boot with no spring hinge, while a hard shell sensor is a spring-loaded clip. Soft tip sensors are often preferred for comfort during longer monitoring.
Related SpO2 Sensors
Need a different size or length?
See the Philips M1191AL Large Adult Soft Tip SpO2 Sensor 3.0m, the Philips M1191A Adult Soft Tip SpO2 Sensor 2.0m, the Philips M1194A Adult Ear Clip SpO2 Sensor 2.0m, the Philips M1192AL Pediatric Soft Tip SpO2 Sensor 3.0m and the Philips M1196AL Adult Hard Shell SpO2 Sensor 3.0m.
Reviews
There are no reviews yet.