Nihon Kohden TL-651S Adult Soft Tip SpO2 Sensor 3.0m (Reusable New)

The Nihon Kohden TL-651S SpO2 sensor is a reusable adult soft tip pulse oximetry finger probe with a 3.0m cable and a 9-pin round connector. It is built to the Nihon Kohden TL-651S reference specifications and works with Nihon Kohden SVM-7500 and SVM-7501 patient monitors to measure blood oxygen saturation (SpO2) and pulse rate. Each sensor is supplied new, one piece per bag, with a 12-month warranty.

Key Benefits of This Adult Soft Tip SpO2 Sensor

• Comfortable for longer monitoring: The soft, flexible tip sleeves over the finger without the spring pressure of a clip-style probe.
• Extra reach: A 3.0m cable gives freedom to position the monitor away from the bedside.
• Reusable design: Cleaned between patients, it lowers the cost per use versus single-patient adhesive sensors.
• Direct fit: Made for Nihon Kohden SpO2 technology on SVM-7500 / SVM-7501 monitors.
• Peace of mind:

Features of the TL-651S Soft Tip Pulse Oximeter Probe

• Adult patient size, soft tip (finger sleeve) sensor style
• 3.0m (approx. 9.8 ft) one-piece cable
• 9-pin round push-pull monitor connector
• Nihon Kohden SpO2 technology
• Reusable lifecycle, easy to wipe clean
• Packed 1 pc per bag

Technical Specifications

Part Number Cross-Reference

Works With These Nihon Kohden Monitors

• Nihon Kohden SVM-7500
• Nihon Kohden SVM-7501

Please confirm your monitor model and the connector on your current sensor before ordering.

Use Cases

• Continuous SpO2 monitoring in general wards, recovery and step-down units
• Spot-check oxygen saturation in clinics and outpatient departments
• Replacing a worn or damaged TL-651S finger probe on an SVM-series bedside monitor
• Biomedical engineering spares stock for Nihon Kohden fleets

Application and Care

• Slide the soft tip over a clean adult finger with the cable running along the back of the hand.
• Check the site regularly and reposition during extended monitoring.
• Wipe the sensor and cable with a facility-approved disinfectant between patients; do not immerse or autoclave.
• Inspect the cable and connector for damage before each use.

Frequently Asked Questions

Which monitors does the TL-651S adult soft tip SpO2 sensor work with?

It works with Nihon Kohden SVM-7500 and SVM-7501 patient monitors that use Nihon Kohden SpO2 technology.

Is this SpO2 sensor reusable?

Yes. It is a reusable sensor intended for multi-patient use when cleaned and disinfected between patients.

How long is the cable?

The cable is 3.0 metres (about 9.8 feet) long from the sensor to the monitor connector.

What connector does this sensor have?

It has a 9-pin round push-pull connector for the SpO2 port of the listed Nihon Kohden monitors.

What is the difference between a soft tip and a hard shell finger sensor?

A soft tip sensor uses a flexible sleeve that slips over the finger, which many patients find more comfortable for longer monitoring. A hard shell (finger clip) sensor uses a hinged, spring-loaded clip that is quick to apply for spot checks.

Is the sensor new and is there a warranty?

Yes. The sensor is brand new and covered by a 12-month warranty.

Related SpO2 Sensors

Need a different style or length?

See the Nihon Kohden TL-201T Adult Hard Shell SpO2 Sensor 1.6m, the Nihon Kohden TL-201T1 Adult Hard Shell SpO2 Sensor 0.6m, the Nihon Kohden Pediatric Soft Tip SpO2 Sensor 1.6m, the Nihon Kohden Adult Ear Clip SpO2 Sensor 1.6m or the Nihon Kohden Adult Adhesive SpO2 Sensor 0.9m.