The Nihon Kohden Neonate Wrap SpO2 Sensor 1.6m is a new, reusable pulse oximetry probe built to Nihon Kohden SpO2 reference specifications. It wraps gently around a newborn’s foot or hand to measure blood oxygen saturation (SpO2) and pulse rate, and plugs directly into Nihon Kohden Life Scope and BSM series patient monitors through a 9-pin connector on a 1.6 metre cable.
Key Benefits of This Neonatal SpO2 Wrap Sensor
- Made for newborns: The wrap-style design conforms to small neonatal application sites where a finger clip cannot be used.
- Reusable and economical: Can be cleaned and reapplied between patients, lowering cost per use versus single-use adhesive sensors.
- Direct connection: Works with Nihon Kohden SpO2 technology with no adapter cable required on listed monitors.
- Practical 1.6m cable: Enough reach for cots, incubators and bedside monitors without excess cable clutter.
- Peace of mind:
Features
- Patient size: Neonate
- Sensor style: Wrap
- SpO2 technology: Nihon Kohden
- Connector: 9-pin
- Cable length: 1.6m (approx. 5.2 ft)
- Lifecycle: Reusable
- Packaging: 1 pc per bag
Technical Specifications
| Specification | Detail |
|---|---|
| Product | Neonate Wrap SpO2 Sensor |
| Part Number | SS-043-NW16 |
| Monitor Brand | Nihon Kohden |
| SpO2 Technology | Nihon Kohden |
| Patient Size | Neonate |
| Sensor Type | Wrap |
| Connector | 9-pin |
| Cable Length | 1.6m |
| Lifecycle | Reusable |
| Condition | New |
| Unit | 1 pc per bag |
| Warranty | 12 months |
Cross-Reference Part Numbers
| Brand | Reference Number |
|---|---|
| Unimed | U305-16 |
Works With These Monitors
Nihon Kohden
- Life Scope I (BSM-2300, BSM-2301, BSM-2303, 2303K, BSM-230K, MSM 2301K)
- Life Scope L (BSM-2350, BSM-2351, BSM-2353)
- Life Scope P (BSM-4100, BSM-4101, BSM-4111, BSM-4113)
- Life Scope A (BSM-5100, BSM-5105, BSM-5135)
- BSM-3500, BSM-6000 series (BSM-6301K, BSM-6501K, BSM-6701K)
- Life Scope M (BSM-9510), Life Scope S (BSM-9800), Life Scope TR
- Oxipal P225F
Hamilton
- G5, S1
Always confirm your monitor’s SpO2 connector and technology before ordering.
Use Cases
- Neonatal intensive care units (NICU) and special care nurseries
- Maternity and delivery suites for newborn oxygen saturation checks
- Paediatric wards, emergency departments and patient transport
- Biomedical engineering departments replacing worn or damaged neonatal probes
Application and Care
- Wrap the sensor around the application site so the emitter and detector sit directly opposite each other; secure snugly without restricting circulation.
- Check the site regularly and reposition as required by your clinical protocol.
- Wipe clean with an approved disinfectant between patients. Do not immerse, autoclave or soak the connector.
- Inspect the cable and sensor before each use and replace if damaged.
Frequently Asked Questions
Which monitors does this neonate wrap SpO2 sensor work with?
It works with Nihon Kohden Life Scope and BSM series monitors that use Nihon Kohden SpO2 technology with a 9-pin sensor connector, including BSM-2301, BSM-2351, BSM-4100, BSM-5100 and the BSM-6000 series, plus Hamilton G5 and S1.
Is this sensor reusable or disposable?
It is a reusable sensor. Clean and disinfect it between patients according to your facility protocol.
How long is the cable?
The cable is 1.6 metres (about 5.2 feet) long.
What patient size is it intended for?
It is sized for neonates. For infants, children or adults, choose a sensor in the matching patient size.
What warranty is included?
The sensor is covered by a 12-month warranty.
Related SpO2 Sensors
Need a different size or style?
See the Nihon Kohden TL-201T Adult Hard Shell SpO2 Sensor 1.6m, the Nihon Kohden Pediatric Soft Tip SpO2 Sensor 1.6m, the Nihon Kohden Adult Ear Clip SpO2 Sensor 1.6m, the Nihon Kohden Adult Adhesive SpO2 Sensor 0.9m, or the Nellcor OxiMax Neonate Wrap SpO2 Sensor 3.0m.
Reviews
There are no reviews yet.