The Nellcor DS100A adult hard shell SpO2 sensor, 3.0m is a reusable finger-clip pulse oximetry probe with a rigid clip housing, a 3.0m cable, and a 9-pin connector, built to the Nellcor DS100A (3.0m) reference specifications to deliver accurate oxygen saturation (SpO2) and pulse rate readings on Nellcor OxiMax-enabled patient monitors.
The extended 3.0m cable gives clinicians the extra reach needed for larger rooms, transport carts, and bedside setups where a shorter cable falls short.
Reliable Adult SpO2 Monitoring in a Hard Shell Design
Unlike soft wrap-style probes, this hard shell adult SpO2 sensor uses a rigid spring-loaded clip to hold the emitter and detector in fixed alignment against the fingertip, reducing motion artifact and signal dropout during vitals checks, ward rounds, and recovery-room monitoring.
- Rigid hard shell clip keeps optical components securely aligned
- Stable SpO2 and pulse rate signal on OxiMax-enabled monitors
- Reusable build lowers cost-per-patient versus disposable sensors
- Extended 3.0m cable reaches monitors on carts or across larger rooms
OxiMax 9-Pin Connector for Plug-and-Play Fit
The sensor terminates in a 9-pin (DB9-style) male connector built to the OxiMax sensor-port pattern, so it seats directly into Nellcor and Nellcor-equipped OEM monitors without an adapter.
Connector Highlights
- 9-pin, DB9-style male connector, OxiMax sensor-port pattern
- Firm pin engagement for a stable, consistent signal
- Matches the port layout used across Nellcor OxiMax-enabled monitors
Rigid Hard Shell Clip with an Extended 3.0m Cable
The 3.0m (9.8ft) cable stays flexible through daily clinical handling and gives more working distance than the site’s shorter hard shell sibling.
Cable & Housing Benefits
- 3.0m length reaches monitors positioned further from the bedside
- Flexible cable resists kinking and cracking from routine cleaning
- Hard shell housing protects internal optics from knocks and drops
Works Across Nellcor & OxiMax-Enabled Monitors
This reusable Nellcor OxiMax hard shell sensor is designed to work with patient monitors that use the OxiMax 9-pin sensor interface, including Datascope Passport and Accutorr Plus, GE Healthcare Dash and Solar 8000 series, Mindray BeneVision and Passport series, Philips IntelliVue and SureSigns, Welch Allyn Propaq and Atlas, Nihon Kohden BSM series, and Physio-Control Lifepak 12/15. Always confirm the sensor port on your specific monitor model before ordering.
Reusable Design Built for Clinical Cost Efficiency
Rather than a single-use disposable probe, this reusable adult hard shell SpO2 sensor is built for repeated clinical use following your facility’s standard cleaning and disinfection protocol, helping reduce ongoing consumable spend while keeping monitoring accuracy consistent. It is backed by a 12-month warranty against manufacturing defects.
Clinical Applications
- General ward and bedside adult patient monitoring
- Emergency departments
- Post-operative recovery units
- Outpatient clinics and day-procedure units
- Medical equipment suppliers and biomedical service providers
Product Specifications
| Product Name | Nellcor DS100A Adult Hard Shell SpO2 Sensor, 3.0m |
| Model / Reference | DS100A (3.0m) |
| Patient Size | Adult |
| Sensor Style | Hard shell finger clip |
| Technology | Nellcor OxiMax |
| Connector Type | 9-Pin (DB9-style) male |
| Cable Length | 3.0m / 9.8ft |
| Lifecycle | Reusable |
| Unit | 1 pcs/bag |
| Warranty | 12 Months |
| Condition | New |
Cross-Reference & Part Numbers
| Brand | Reference Number |
| Nellcor | DS100A (3.0m) |
| Orantech | SS-001XN-AF30 |
| Unimed | U410-01P, U410-01XP |
Frequently Asked Questions
What is the cable length of this Nellcor DS100A hard shell sensor?
The cable measures 3.0 metres (approximately 9.8ft), giving extra reach for monitors on carts or positioned further from the bedside.
How is this different from the 0.9m hard shell version?
Both use the same DS100A OxiMax hard shell design and 9-pin connector; this version has a longer 3.0m cable instead of 0.9m, for setups that need more reach.
Which monitors is this Nellcor DS100A hard shell sensor designed for?
It is built for Nellcor and Nellcor-equipped OEM patient monitors that use the OxiMax 9-pin (DB9-style) sensor interface. Confirm your monitor’s sensor port before ordering.
Can this sensor be reused on multiple patients?
Yes. It is a reusable sensor intended for repeated clinical use following your facility’s standard cleaning and disinfection protocol between patients.
What is included with this sensor?
Each order includes one adult hard shell SpO2 sensor with an attached 3.0m cable and 9-pin connector.
Looking for a Different Sensor Style?
See our Nellcor DS100A adult finger clip SpO2 sensor, Nellcor pediatric hard shell SpO2 sensor, or Philips M1194B adult ear clip SpO2 sensor. Pair it with an adult hard shell Masimo 2053 SpO2 sensor, or browse our Masimo 4050 RD Set SpO2 sensor range.
Reviews
There are no reviews yet.