The Mindray Masimo SET Adult Ear Clip SpO2 Sensor 3.0m is a reusable pulse oximetry probe that clips onto an adult patient’s earlobe to measure oxygen saturation (SpO2) and pulse rate on Mindray patient monitors equipped with Masimo SET technology.
It has a 3.0 m (9.8 ft) cable and a round, keyed purple monitor connector, and is built to the Unimed U910-48MR and Praymed PSG0012-L reference specifications. Each sensor is supplied new, one piece per bag.
Why Choose This Mindray Masimo SET Ear Clip SpO2 Sensor?
- Earlobe monitoring site: A dependable alternative when fingers are cold, poorly perfused, injured or needed free for treatment.
- Made for Masimo SET SpO2 modules: Designed for Mindray monitors configured with Masimo SET pulse oximetry.
- Long 3.0 m cable: Generous reach from bedside or transport monitor to the patient, with less strain on the connector.
- Reusable design: Wipes clean between patients for a lower cost per use than single-use probes.
- Lightweight spring clip: Gentle, secure grip on the earlobe for spot checks and continuous monitoring.
- Manufactured to recognised medical device quality standards.
Key Features of the Reusable Adult Ear SpO2 Probe
Ear Clip Sensor Head
The compact grey clip positions the LED emitter and photodetector on opposite sides of the earlobe, giving a stable light path for consistent adult SpO2 and pulse rate readings.
Round Keyed Monitor Connector
The purple round connector is keyed for correct alignment and plugs straight into the Masimo SET SpO2 port on supported Mindray monitors, so no adapter cable is needed on those units.
Flexible 3.0 m Cable
The soft light-grey cable resists kinking and is easy to wipe down, suiting busy wards, emergency departments and operating theatres.
Specifications: Mindray Masimo SET Adult Ear Clip SpO2 Sensor
| Product | Adult Ear Clip SpO2 Sensor for Mindray monitors |
|---|---|
| SpO2 Technology | Masimo SET |
| Reference Numbers | Unimed U910-48MR, Praymed PSG0012-L |
| SKU | MND-MSET-SPO2-ADULT-EC-3M |
| Condition | New |
| Patient Size | Adult |
| Sensor Type | Ear Clip |
| Cable Length | 3.0 m (9.8 ft) |
| Connector | Round, keyed, purple monitor connector |
| Lifecycle | Reusable |
| Unit | 1 piece per bag |
Cross-Reference
| Brand | Reference Number |
|---|---|
| Unimed | U910-48MR |
| Praymed | PSG0012-L |
Works With These Monitors
Built to the reference specifications for the following equipment. Always confirm that your monitor has the Masimo SET SpO2 option and a matching SpO2 port before ordering.
- Mindray BeneVision: N1, N12, N15, N17, N19, N22 and N Series (including Masimo Rainbow Option versions)
- Mindray BeneView: T1, T5, T6, T8, T9 (including Masimo Rainbow Option versions)
- Mindray BeneHeart: D2, D3, D6 (including Masimo Rainbow Option versions)
- Mindray iPM / iMEC / ePM: iPM 6, iPM 8, iPM 10, iPM 12, iPM 9800, IPM Series, iMEC 6, iMEC 8, iMEC 10, iMEC 12, ePM 10
- Mindray Passport / Accutorr / DPM: Passport 8, Passport 12, Passport 12m, Passport 17m, Accutorr 3, Accutorr 7, DPM 6, DPM 7
- Datascope: Accutorr 3, Accutorr 7, BeneVision N1, DPM6, DPM7, MEC 12, MPM, PM 6800
Typical Use Cases
- ICU, CCU and high-dependency units needing continuous adult SpO2 monitoring
- Emergency departments and patient transport where finger sites are unsuitable
- Operating theatres and recovery (PACU) when hands are tucked or inaccessible
- Patients with poor peripheral perfusion, cold extremities, tremor or nail polish
- Biomedical engineering departments stocking spare Mindray Masimo SET SpO2 probes
Application and Care
- Clip the sensor onto the fleshy part of the earlobe and route the cable so it does not pull on the clip.
- Disconnect the sensor from the monitor before cleaning.
- Wipe the clip and cable with a soft cloth dampened with 70% isopropyl alcohol or a mild hospital disinfectant.
- Do not immerse, autoclave or steam sterilise the sensor.
- Allow it to dry fully before reuse, and reposition the clip regularly during long monitoring sessions to protect the skin.
Frequently Asked Questions
What is the Mindray Masimo SET Adult Ear Clip SpO2 Sensor used for?
It measures blood oxygen saturation and pulse rate from the adult earlobe, giving clinicians an alternative monitoring site when finger sensors produce weak or unreliable signals.
Which Mindray monitors does this ear clip sensor work with?
It works with Mindray BeneVision N-Series, BeneView T-Series, BeneHeart D2/D3/D6, iPM, iMEC, Passport 8/12/12m/17m and Accutorr 3/7 monitors that are fitted with Masimo SET SpO2.
Will it work on a Mindray monitor with standard Mindray or Nellcor SpO2?
No. This sensor is for monitors configured with Masimo SET SpO2. For Mindray monitors with a 6-pin Mindray or Nellcor SpO2 port, choose our 6-pin Mindray ear clip sensor instead.
How long is the cable?
The cable is 3.0 metres, approximately 9.8 feet.
Is this SpO2 ear sensor reusable?
Yes. It is a reusable sensor that can be cleaned and disinfected between patients following your facility’s protocol.
Can it be used on children or neonates?
No. The clip is sized for adult earlobes. Select a pediatric or neonatal SpO2 sensor for smaller patients.
What are the cross-reference numbers?
This sensor cross-references to Unimed U910-48MR and Praymed PSG0012-L.
Is the product new?
Yes. Every unit is supplied brand new, one piece per bag.
Related SpO2 Sensors
Need a different connector or sensor style?
See our Mindray Adult Ear Clip SpO2 Sensor 3.0m (6-Pin), the Mindray 512FLL Adult Hard Shell SpO2 Sensor 3.0m, the Mindray 0600-00-0093 Multi-Y SpO2 Sensor 3.0m, the Masimo 2503 M-LNCS TC-I Adult Ear Clip SpO2 Sensor 1.0m and the Masimo SET Adult Ear Clip SpO2 Sensor for Philips Monitors 3.0m.
Reviews
There are no reviews yet.