Masimo 2502 M-LNCS DCIP Pediatric Hard Shell SpO2 Sensor 1.0m (Reusable New)

The Masimo 2502 M-LNCS DCIP Pediatric Hard Shell SpO2 Sensor is a reusable finger-clip pulse oximetry sensor with a 1.0 m (3.3 ft) cable, built to the Masimo 2502 (M-LNCS DCIP) reference specifications. It measures oxygen saturation (SpO2) and pulse rate on pediatric patients and connects to monitors and patient cables that accept Masimo M-LNCS sensors. Condition: brand new.

Key Benefits of This Pediatric M-LNCS SpO2 Sensor

• Sized for children: Pediatric hard shell clip designed for smaller fingers, for spot-checks and short-term monitoring.
• Reusable and cost-effective: Durable hard shell housing that can be cleaned and reused between patients, cutting per-test costs versus single-use sensors.
• Masimo M-LNCS technology: Works with M-LNCS input connections and patient cables.
• Cross-referenced part numbers: Matches Masimo 2502 / 3658, GE Healthcare 2068423-062 / 2068423-038, Draeger MP02982 and Comen 040-000373-00 references.
• Quality backed:

Features of the Masimo 2502 Pediatric Finger Clip Sensor

Hard Shell Finger Clip Design

A rigid, spring-loaded clip with a soft internal pad holds the emitter and detector in consistent alignment on the finger, helping reduce motion-related signal loss during routine pediatric monitoring.

1.0 m Integrated Cable

The short 1.0 m (3.3 ft) lead keeps cable clutter low at the bedside and connects to an M-LNCS patient cable or directly to the monitor input.

M-LNCS Connector

The 15-pin M-LNCS style plug with a latching housing gives a secure connection to M-LNCS patient cables and equipment inputs.

Masimo 2502 SpO2 Sensor Specifications

Cross-Reference Part Numbers

Monitors This M-LNCS Pediatric Sensor Works With

• Masimo: Radius-7
• Biolight: BLT A6, BLT A8, M8500, Q3, Q6, Q7
• Other monitors and modules with a Masimo M-LNCS SpO2 input (check your device’s accepted sensor list or the cross-reference numbers above before ordering)

Use Cases

• Pediatric wards and children’s hospitals
• Emergency departments and urgent care
• Pediatric clinics and GP practices
• Recovery rooms and procedural sedation
• Patient transport and step-down units

Care and Maintenance

• Wipe the sensor and cable with a soft cloth dampened with 70% isopropyl alcohol between patients; let dry fully before reuse.
• Do not immerse, autoclave or sterilise with high heat.
• Inspect the clip, pads and cable for damage before each use; do not bend the cable sharply at the connector.
• Reposition the sensor site regularly during extended monitoring.

Frequently Asked Questions

What is the Masimo 2502 SpO2 sensor?

The Masimo 2502 (M-LNCS DCIP) is a reusable pediatric finger-clip pulse oximetry sensor using M-LNCS connector technology. This listing is a new sensor built to that reference, with a 1.0 m cable.

Is this sensor for children or adults?

It is a pediatric sensor. For adult patients, choose the adult M-LNCS hard shell version linked below.

Is the Masimo 2502 sensor reusable?

Yes. The hard shell clip is designed for repeated use and can be cleaned between patients.

Which part numbers does it cross-reference?

Masimo 2502 and 3658, GE Healthcare 2068423-062 and 2068423-038, Draeger MP02982, Comen 040-000373-00 and Unimed U103-203.

Will it work with my monitor?

It works with the Masimo Radius-7 and Biolight BLT A6, A8, M8500, Q3, Q6 and Q7, plus equipment that accepts Masimo M-LNCS sensors. If unsure, contact us with your monitor model before ordering.

What is the warranty?

12 months from delivery.

Related SpO2 Sensors

Explore more: Masimo 2501 M-LNCS DCI Adult Hard Shell SpO2 Sensor, Masimo 1864 LNCS Pediatric Hard Shell SpO2 Sensor, Masimo LNCS Neonate Wrap SpO2 Sensor, Masimo 1969 LNCS Adult Hard Shell SpO2 Sensor and Masimo 2258 Multi-Y SpO2 Sensor.