The GE Healthcare pediatric hard shell SpO2 sensor is a reusable finger-clip pulse oximetry probe with a 3.0 m (9.8 ft) cable and an 11-pin GE-style connector, built for Masimo Rainbow technology.
It delivers continuous SpO2 and pulse rate monitoring for pediatric patients on GE Healthcare Carescape, Dash, Solar, B40/B125 and Dinamap ProCare systems, Marquette monitors, and Datascope and Bitmos devices listed below.
Key Benefits of This GE Pediatric SpO2 Sensor
- Pediatric-sized hard shell clip a rigid, spring-loaded housing sized for children’s fingers keeps the emitter and detector aligned for steady readings.
- Long 3.0 m cable reaches the monitor from the bed, cot or stretcher without an extension cable.
- Direct 11-pin GE connection plugs straight into GE Healthcare and Marquette SpO2 ports that run Masimo technology.
- Reusable and cost-effective designed for repeated use with routine cleaning, lowering cost per monitoring session versus single-use probes.
- Brand new with 6-month warranty
Features of the GE Masimo Rainbow Pediatric Finger Clip
Durable Hard Shell Design
The hard shell housing protects the optical components against drops and daily handling in busy pediatric wards, emergency departments and transport settings. A soft inner pad improves comfort and helps block ambient light.
11-Pin GE-Style Connector
The blue 11-pin connector matches the GE Healthcare SpO2 interface, allowing quick, secure connection at the bedside.
Flexible, Easy-Clean Cable
The 3.0 m medical-grade cable resists kinking and tangling and wipes down easily between patients.
GE Healthcare Pediatric SpO2 Sensor Specifications
| Specification | Details |
|---|---|
| Part Number (Cross-Reference) | Unimed U110-21MR |
| Product Type | Reusable SpO2 Sensor |
| Patient Size | Pediatric |
| Sensor Type | Hard Shell (Finger Clip) |
| SpO2 Technology | Masimo Rainbow |
| Connector | 11-pin GE Healthcare style |
| Cable Length | 3.0 m (9.8 ft) |
| Lifecycle | Reusable |
| Packaging | 1 pc per bag |
| Warranty | 6 Months |
| Condition | New |
Cross-Reference Part Numbers
| Brand | Reference Number |
|---|---|
| Unimed | U110-21MR |
Monitors This GE Rainbow SpO2 Sensor Works With
- GE Healthcare: 128, 250, 250cx, 259, B125, B40, Carescape B450, Carescape B650, Carescape B850, Carescape V100, Carescape V100 with Masimo technology, Dash Series, Dinamap ProCare with Masimo, Pro 1000, Pro 300V2, ProCare 300, ProCare Auscultatory 400, ProSeries V2, SOLAR Series, TRAM 450SL, V300
- Marquette: 8000 e Eagle 1000, CardioLab, Dash 2000, Dash 2500, Dash 3000, Dash 4000, Dash 5000, Eagle, i/9500, i/9500 (Tram 451N5/851N5), MAC-Lab, PDM Module, Procare B40, Smk SMV, SOLAR, Solar 7000, Solar 8000, Solar 8000M, Tram 451, TRAM Modular, x50SL Series
- Datascope: Accutor V, Accutorr 3, Accutorr 7, Accutorr Plus, DPM4, DPM6, DPM7, EPM4, MEC 12, MPM, Passport 2LT, Passport XG, PM 6800, T8, V12, V21, VS 800
- Bitmos: SAT 800, SAT 801, SAT 805, SAT 816, SatPuls
Always confirm your monitor’s SpO2 connector and software configuration (Masimo-enabled port) before ordering.
Typical Use Cases
- Pediatric wards and children’s hospitals
- Emergency departments and pediatric resuscitation bays
- Operating rooms, recovery and PACU
- Patient transport with GE Dash and Carescape monitors
- Clinics using GE Dinamap ProCare and V100 vital signs monitors
Care and Cleaning
- Disconnect the sensor from the monitor before cleaning.
- Wipe the clip and cable with 70% isopropyl alcohol or a mild hospital-grade disinfectant; allow to dry fully.
- Do not immerse, autoclave or gas-sterilise the sensor.
- Inspect the cable and clip before each use and rotate the measurement site every few hours during continuous monitoring.
Frequently Asked Questions
What is the GE Healthcare pediatric hard shell SpO2 sensor?
It is a reusable pediatric finger-clip pulse oximetry sensor with a 3.0 m cable and an 11-pin GE-style connector, built for GE Healthcare monitors that use Masimo Rainbow technology.
Which patients is this sensor designed for?
It is designed for pediatric patients whose fingers suit a pediatric-sized clip. For adults, choose an adult hard shell, soft tip or ear clip sensor.
Does it work with GE Carescape and Dash monitors?
Yes. It works with Carescape B450, B650, B850 and V100 (Masimo), and with Dash 2000 through Dash 5000 monitors fitted with Masimo SpO2.
What connector does this sensor use?
It uses an 11-pin GE Healthcare style connector that plugs directly into the monitor’s SpO2 port or matching GE patient cable.
What is the cross-reference part number?
This sensor cross-references Unimed part number U110-21MR.
Is the sensor reusable, and what warranty is included?
Yes. It is designed for multi-patient use with cleaning between patients and includes a 6-month warranty.
How long is the cable?
The cable is 3.0 m (about 9.8 ft), long enough for most bedside and transport setups without an extension.
Related SpO2 Sensors
Browse more GE and Masimo-technology sensors: GE Healthcare Adult Soft Tip SpO2 Sensor 3.0m, GE Healthcare Adult Ear Clip SpO2 Sensor 3.0m, Datex Ohmeda OXY-F4-N Adult Hard Shell SpO2 Sensor 3.0m, Masimo 1864 Pediatric Hard Shell SpO2 Sensor 1.0m and Masimo 2054 Adult Hard Shell SpO2 Sensor 3.6m (Rainbow).
Reviews
There are no reviews yet.