GE Healthcare Adult Soft Tip SpO2 Sensor 3.0m (Nellcor OxiMax Technology, New)

The GE Healthcare Adult Soft Tip SpO2 Sensor 3.0m is a reusable pulse oximetry finger sensor built to the Nellcor OxiMax reference specifications. It features a 11-pin connector and a 3.0-metre cable, and is designed for adult patients (40kg/88lb and above) on GE Healthcare and Marquette patient monitoring systems.

This adult soft tip SpO2 sensor slips over the fingertip to continuously monitor arterial oxygen saturation (SpO2) and pulse rate. It is manufactured to OEM fit, form, and function so it plugs directly into the same 11-pin SpO2 port used by GE Healthcare and Marquette monitors, without requiring an adapter cable. The soft, flexible tip design allows repeated use across multiple patients while remaining comfortable enough for extended monitoring sessions.

Key Features & Benefits

• Reusable adult soft tip sensor built for repeated use, reducing per-patient consumable costs
• Nellcor OxiMax signal technology for accurate, stable SpO2 and pulse rate readings
• 11-pin connector engineered to GE Healthcare / Marquette reference specifications for a direct, adapter-free fit
• 3.0-metre cable length gives clinicians extra reach from the monitor to the bedside
• Soft tip design distributes pressure evenly across the fingertip for improved patient comfort
• 12-month warranty for peace of mind

Technical Specifications

Cross-Reference Numbers

Always cross-check reference numbers against your monitor’s service manual before ordering.

Works With These Monitors

GE Healthcare

128, 250, 250cx, 259, B40, Carescape B650, Carescape B850, Carescape V100, Dash Series, TRAM 450SL

Marquette

Dash 2500, Dash 3000, Dash 4000, Dash 5000, Eagle, i/9500, PDM Module, Procare B40, SOLAR, Solar 8000, Solar 8000M, Tram 451, TRAM Modular, x50SL Series

Use Cases

• Continuous SpO2 and pulse rate monitoring for adult patients in general wards and ICU settings
• Bedside patient monitoring on GE Healthcare and Marquette central station systems
• Replacement sensor for biomedical departments standardising on OxiMax-supported finger sensors

Care & Maintenance

• Wipe the sensor housing and cable with a soft cloth dampened with a mild disinfectant between patients
• Avoid immersing the connector end in liquid
• Inspect the cable and pins for damage before each use and retire the sensor if the housing is cracked or the cable insulation is worn
• Store flat or loosely coiled to avoid stressing the cable strain relief

Frequently Asked Questions

What patient size is this SpO2 sensor designed for?

This soft tip sensor is designed for adult patients weighing approximately 40kg/88lb and above.

Is this sensor reusable or disposable?

It is a reusable sensor intended for repeated use across multiple patients, subject to your facility’s infection-control protocols.

Which monitors does this sensor work with?

It is built to the 11-pin GE Healthcare / Marquette reference specification and works with GE Healthcare and Marquette monitors listed in the Works With These Monitors section above, including the Dash Series, Solar 8000/8000M, and Carescape B650/B850/V100.

What cable length does this sensor have?

The cable measures 3.0 metres from the sensor to the monitor connector.

Does this sensor require an adapter cable?

No. The 11-pin connector plugs directly into a supported GE Healthcare or Marquette SpO2 port without an adapter.

Related SpO2 Sensors

Browse other reusable SpO2 sensors in our range: Philips M1194B Adult Ear Clip SpO2 Sensor 1.0m, Philips 8-Pin Reusable SpO2 Sensor, Masimo 4050 RD Set DCI Short SpO2 Adult Clip, Nellcor DS100A Adult Finger Clip SpO2 Sensor, and the Philips M1191BL Adult Soft Tip SpO2 Sensor 3.0m.