The Bionet Multi-Y SpO2 Sensor is a reusable, all-sizes pulse oximetry probe with a 3.0m cable, built to the reference specifications of Bionet BM3 and BM5 patient monitors. Its two-branch Y-style sensor head can be positioned on a finger, toe, hand or foot, so a single sensor measures oxygen saturation (SpO2) and pulse rate on adult, pediatric, infant and neonatal patients. It is supplied new with a 12-month warranty.
Key Benefits of the Bionet Multi-Y Pulse Oximeter Sensor
- One sensor for every patient size the flexible Y-probe adapts to adults, children, infants and neonates, reducing the number of sensors you need to stock.
- Flexible site selection place the emitter and detector on a finger, toe, hand or foot using a wrap or clip holder.
- Reusable design wipe-clean construction lowers cost per patient compared with single-use sensors.
- Long 3.0m cable gives generous reach between the monitor and the bedside.
- Direct connection plugs into the SpO2 port of Bionet BM3 and BM5 monitors.
Features
- Multi-Y (Y-type) multi-site SpO2 sensor head with separate emitter and detector pads
- Patient size: All Sizes (adult, pediatric, infant, neonate)
- 3.0m (approx. 9.8 ft) one-piece cable
- Green round keyed monitor connector
- Reusable lifecycle
- 12-month warranty
Bionet Multi-Y SpO2 Sensor Specifications
| Specification | Detail |
|---|---|
| Product | Multi-Y SpO2 Sensor for Bionet monitors |
| Reference Part Numbers | Unimed U810-108, Praymed PSF0085-L |
| Sensor Type | Multi-Y (multi-site) |
| Patient Size | All Sizes |
| Cable Length | 3.0m |
| Lifecycle | Reusable |
| Works With | Bionet BM3, Bionet BM5 |
| Unit | 1 set per bag |
| Condition | New |
| Warranty | 12 Months |
Part Number Cross-Reference
| Brand | Reference Number |
|---|---|
| Unimed | U810-108 |
| Praymed | PSF0085-L |
Works With These Bionet Monitors
- Bionet BM3
- Bionet BM5
Please check that the SpO2 port on your monitor matches the green round connector shown in the product images before ordering.
Use Cases
- Continuous SpO2 and pulse rate monitoring in general wards, recovery and emergency departments
- Neonatal and pediatric units where patient sizes vary from bed to bed
- Clinics and day-surgery centres that want one multi-site sensor per monitor
- Biomedical engineering departments keeping a universal-size spare for Bionet BM3 and BM5 monitors
Application and Care
- Secure the Y-probe pads opposite each other on the chosen site with a suitable wrap or clip.
- Check the measurement site regularly and reposition as required by your clinical protocol.
- Clean and disinfect the sensor between patients following your facility’s procedures; do not immerse or autoclave.
Frequently Asked Questions
Which monitors does the Bionet Multi-Y SpO2 Sensor work with?
It works with Bionet BM3 and Bionet BM5 patient monitors.
What patient sizes can this sensor be used on?
The Multi-Y design is rated for all sizes: adult, pediatric, infant and neonatal patients, depending on the application site and holder used.
How long is the cable?
The cable is 3.0 metres (about 9.8 feet) long.
Is this SpO2 sensor reusable or disposable?
It is a reusable sensor that can be cleaned and used on multiple patients.
What part numbers does it cross-reference to?
It cross-references to Unimed U810-108 and Praymed PSF0085-L.
Is it new and does it come with a warranty?
Yes. The sensor is supplied new and is covered by a 12-month warranty.
Related SpO2 Sensors
Need a different style or monitor brand?
See the Bionet B-SpO2-FA Adult Hard Shell SpO2 Sensor 3.0m, the Mindray 0600-00-0093 Multi-Y SpO2 Sensor 3.0m, the GE TruSignal TS-W-D Multi-Y SpO2 Sensor 1.0m, the Nihon Kohden TL-220T Multi-Y SpO2 Sensor 1.6m and the Masimo 2505 M-LNCS YI Multi-Y SpO2 Sensor 1.0m.
Reviews
There are no reviews yet.