The Masimo 2317 LNCS Adtx-3 adult SpO2 sensor is a single-patient-use, non-woven adhesive pulse oximetry sensor built to the Masimo 2317 (LNCS Adtx-3) reference specifications.
It uses Masimo LNCS technology, has a 0.9m (3 ft) cable, is packed 20 sensors per box, and is supplied brand new for continuous oxygen saturation (SpO2) and pulse rate monitoring on adult patients.
Why Choose This LNCS Adtx-3 Adult Disposable SpO2 Sensor
- Adult-sized adhesive wrap: Shaped for adult fingers, giving a secure, repeatable sensor position and stable readings.
- Soft non-woven adhesive: Breathable, skin-friendly tape holds the emitter and detector in alignment with minimal irritation.
- Single-patient use: A fresh sensor for every patient supports infection-control protocols and removes cleaning and reprocessing time.
- Masimo LNCS technology: Works with Masimo LNCS patient cables and LNCS-enabled monitors, defibrillators and pulse oximeters.
- Cost-effective bulk pack: 20 sensors per box for ICU, theatre, ED, ward and ambulance stock.
Key Features of the Adult Adhesive Pulse Oximeter Sensor
- Built to the Masimo 2317 LNCS Adtx-3 reference specifications
- 0.9m (3 ft) sensor cable with LNCS-style connector
- Non-woven adhesive wrap printed “ADULT” with finger outline and LED alignment mark
- Lightweight, low-profile design that stays in place during patient movement
- Condition: New
Specifications : Masimo 2317 Adult SpO2 Sensor
| Specification | Detail |
|---|---|
| Reference Model | Masimo 2317 (LNCS Adtx-3) |
| SpO2 Technology | Masimo LNCS |
| Patient Size | Adult |
| Sensor Type | Non-woven adhesive |
| Lifecycle | Disposable (single-patient use) |
| Cable Length | 0.9m (approx. 3 ft) |
| Pack Quantity | 20 pcs per box |
| Condition | New |
Cross-Reference Part Numbers
This sensor matches the following OEM and industry reference numbers:
| Brand | Reference Number |
|---|---|
| Masimo | 2317 (LNCS Adtx-3), 2601 (LNCS Adtx-3), 1859 (LNCS Adtx – OEM version uses an 18 in cable) |
| GE Healthcare | 2066333-001, 2027253-001 |
| Marquette | 2027253-001 |
| Datascope | 0600-00-0121, 520A-30-64101 |
| Draeger | MP00790 |
| Philips | 989803148231 |
| Physio-Control | 11171-000019 |
| Zoll | 8000-0320 |
Works With These Monitors and Devices
Masimo & Patient Monitors
- Masimo: Pronto 7, Rad-5, Rad-57, Rad-87, Rad-8, Radical-7
- GE Healthcare: Carescape B650, B850, V100; B40, B125, B125M; Dash Series; Dinamap ProCare, Pro 300V2, ProSeries V2, V300; SOLAR Series; TRAM 450SL
- Marquette: Dash 2000/2500/3000/4000/5000, Eagle, i/9500, Solar 7000/8000/8000M, TRAM 451 & TRAM Modular, PDM Module
- Datascope / Mindray: Accutorr Plus, Accutorr 3/7, Passport 2/2LT/XG/8/12/V, DPM4/6/7, EPM4, Spectrum, Spectrum OR, Trio, Duo, PM 6000–9000, BeneView T1/T5/T8, BeneHeart D6, TM80
- Philips: IntelliVue MX700 (Masimo Rainbow)
- Draeger: Infinity M540, Narkomed 6400
- Datex Ohmeda: S/5, Giraffe Infant Warmer
Defibrillators & Vital Signs Monitors
- Physio-Control: Lifepak 11, 12, 15, 20, 20E
- Zoll: E Series, M Series, R Series, X Series
- Welch Allyn: 1500, Propaq CS, Propaq LT, Spot Vital Signs LXi, Spot Vital Signs 42MTB-E1
- Others: Bitmos SAT 800/801/805/816 & satPuls, Comen K12 Pro, Invivo Escort II, Mennen Horizon XVu, Respironics Alice 5
Always confirm your monitor runs Masimo LNCS SpO2 and uses a matching LNCS patient cable before ordering.
Clinical Use Cases
- ICU, CCU and general ward continuous SpO2 monitoring
- Operating theatre and post-anaesthesia (PACU) monitoring
- Emergency department and ambulance/paramedic transport with Lifepak or Zoll defibrillators
- Spot-checks and overnight monitoring with Masimo Rad-series pulse oximeters
- Sleep studies and respiratory care
How to Apply the Adult Adhesive SpO2 Sensor
- Choose a finger with good perfusion and clean, dry skin (remove nail polish if present).
- Remove the backing and place the fingertip on the printed finger outline so the emitter and detector sit directly opposite each other.
- Wrap the adhesive snugly without over-tightening, then connect to the LNCS patient cable.
- Check the site regularly and replace the sensor when adhesion weakens or per your facility protocol.
Frequently Asked Questions
What is the Masimo 2317 LNCS Adtx-3 sensor used for?
It is a disposable adhesive pulse oximetry sensor for measuring oxygen saturation (SpO2) and pulse rate on adult patients connected to Masimo LNCS-enabled monitors.
How many sensors come in one box?
Each box contains 20 single-patient-use sensors.
What is the cable length?
The sensor cable is 0.9m (approximately 3 ft).
Is this sensor reusable?
No. It is designed for single-patient use and should be discarded after use on one patient.
Do I need a patient cable?
Most LNCS monitors connect this sensor through a Masimo LNCS patient/extension cable. Check your monitor’s SpO2 port before ordering.
What is the difference between LNCS Adtx-3 and LNCS Adtx?
Both are adult adhesive sensors. The Adtx-3 (2317) has a 0.9m (3 ft) cable, while the LNCS Adtx (1859) OEM version uses a shorter 18-inch cable.
Is the product new?
Related SpO2 Sensors
Masimo 1969 LNCS Adult Hard Shell SpO2 Sensor | Masimo 1864 Pediatric Hard Shell SpO2 Sensor | Masimo 2258 LNCS Multi-Y SpO2 Sensor | Neonate Wrap SpO2 Sensor Masimo LNCS | Nellcor MAX-N Adult/Neonate Adhesive SpO2 Sensor
Reviews
There are no reviews yet.