The Nellcor FlexMax Adult Soft Tip SpO2 Sensor 3.0m is a reusable pulse oximetry probe built to the Nellcor FlexMax (Non-OxiMax, 3.0m) reference specifications.
It uses Nellcor Oxismart technology, a 9-pin connector and a soft silicone finger tip to deliver continuous oxygen saturation (SpO2) and pulse rate readings for adult patients on Nellcor Oxismart-based monitors and oximeters.
Why Choose This Nellcor Oxismart Soft Tip SpO2 Sensor?
- Soft silicone finger sleeve wraps the fingertip gently, reducing pressure points during extended monitoring.
- Stable Oxismart signal designed for Nellcor Oxismart (Non-OxiMax) SpO2 platforms for dependable saturation and pulse rate data.
- Long 3.0m (9.8 ft) cable connects directly to the monitor without an extension cable, giving patients freedom to move.
- Reusable and cost-effective wipe-clean construction lowers cost per patient compared with disposable sensors.
- Brand new condition supplied unused, 1 sensor per bag.
Key Features of the Adult Soft Tip SpO2 Sensor
Comfort-Focused Soft Tip Design
The one-piece silicone sleeve holds the emitter and detector firmly against the finger without a hard spring clip. This makes it well suited to spot checks, continuous bedside monitoring and patients who find hard-shell finger clips uncomfortable.
Nellcor Oxismart (Non-OxiMax) Technology
This sensor is intended for equipment that uses Nellcor Oxismart SpO2 technology. It is not an OxiMax sensor – if your monitor requires Nellcor OxiMax sensors, choose an OxiMax version instead.
9-Pin Connector and 3.0m Direct-Connect Cable
A 9-pin D-style plug connects straight to the SpO2 port of supported Nellcor Oxismart monitors, and the 3.0m lead gives ample reach from the bedside to the device.
Technical Specifications
| Product | Adult Soft Tip SpO2 Sensor, Reusable |
|---|---|
| Reference | Nellcor FlexMax (Non-OxiMax, 3.0m) |
| SpO2 Technology | Nellcor Oxismart (Non-OxiMax) |
| Patient Size | Adult |
| Sensor Type | Soft Tip (silicone finger sleeve) |
| Connector | 9-pin |
| Cable Length | 3.0m (9.8 ft) |
| Lifecycle | Reusable |
| Unit | 1 pc per bag |
| Condition | New |
Cross-Reference Part Numbers
| Brand | Reference Number |
|---|---|
| Nellcor | FlexMax (Non-OxiMax, 3.0m) |
| Unimed | U410S-01 |
Works With These Monitors
Always confirm your monitor uses Nellcor Oxismart (Non-OxiMax) SpO2 before ordering.
- BCI: 3300, Mini Torr Plus
- Bionics: BPM-200
- Bistos: BT-720
- Colin: BP-88S
- Datascope: BeneVision TMS60, DPM6
- Datex Ohmeda: Vitalmax 800 Series (black, Nellcor SpO2)
- Edan: iM3, iM8, M9
- GE Healthcare: 511, 556, SOLAR Series
- Huntleigh: SC1000
- Ivy Biomedical: 405D
- Lumeon: Hand-held Oximeter
- Marquette: Dash 3000, PDM Module, Solar 8000M
- Mindray: BeneHeart D3, BeneHeart D6, BeneVision ePM 10 / 10 Neo / 10M / 12 / 12M / 15, BeneVision N1, N12, N12 Neo, N15, N15 Neo, N15 OR, N17, N17 Neo, N19, N22, BeneVision TMS-6016, TMS30 / VS900, uMEC 10, uMEC 12, VS-600, VS-900, VS-900 Neo, MEC 1200, Passport, Spectrum
- Nellcor: N 3000, N 390, NPB 3930, NPB 75
- Philips: M1350C, M1722A, M3927, M3929A, Merlin Systems
- Spacelabs: 90351-0/6, 90369, 91369
- Welch Allyn: Atlas (Nellcor SpO2)
Common Use Cases
- Continuous SpO2 monitoring in ICU, CCU and general wards
- Emergency departments and patient transport
- Operating theatres, PACU and procedural sedation
- Outpatient clinics, sleep studies and long-term care
- Replacing worn or damaged Nellcor Oxismart adult finger sensors
Care and Cleaning
- Wipe the sensor and cable with a soft cloth dampened with 70% isopropyl alcohol or a mild hospital-grade disinfectant between patients.
- Do not immerse, autoclave or gas-sterilise the sensor.
- Allow to dry fully before reuse; coil the cable loosely for storage.
- Inspect the sleeve and cable regularly and replace if damaged.
Frequently Asked Questions
What is the Nellcor FlexMax Adult Soft Tip SpO2 Sensor 3.0m?
It is a reusable adult finger sensor with a soft silicone tip, a 3.0m cable and a 9-pin connector, built to the Nellcor FlexMax (Non-OxiMax, 3.0m) reference for Nellcor Oxismart pulse oximetry systems.
Does this sensor work with Nellcor OxiMax monitors?
No. This is a Non-OxiMax (Oxismart) sensor. OxiMax monitors need an OxiMax-technology sensor.
What cable length does this SpO2 sensor have?
The cable is 3.0 metres (approximately 9.8 ft) and connects directly to the monitor.
Is the sensor reusable?
Yes. It is designed for repeated use and can be cleaned between patients by wiping with an approved disinfectant.
Which part numbers does it cross-reference?
Nellcor FlexMax (Non-OxiMax, 3.0m) and Unimed U410S-01.
Is the soft tip suitable for all patients?
It is sized for adults. For children or infants, choose a pediatric or neonate sensor.
Reviews
There are no reviews yet.