Spacelabs 015-0130-01 Adult Hard Shell SpO2 Sensor 3.0m (Novametrix Technology Reusable New)

The Spacelabs 015-0130-01 SpO2 sensor is a new, reusable adult hard shell finger clip pulse oximetry sensor with a 3.0m (9.8ft) cable, built to the Spacelabs 015-0130-00, 015-0130-01 and 90651A-08 reference specifications. It uses Novametrix SpO2 technology and works with Spacelabs patient monitors and modules including the 90651A, 90369, 90309 and Scout series for continuous or spot-check oxygen saturation and pulse rate monitoring.

Key Benefits of This Spacelabs Adult Finger Clip SpO2 Sensor

• Direct fit for Spacelabs Novametrix-technology monitors matches the 015-0130-01 reference connector and sensor specification.
• Long 3.0m cable gives extra reach between the bedside monitor and the patient, reducing cable strain and accidental disconnection.
• Reusable hard shell design a durable clip housing made for repeated daily use, lowering cost per patient compared with single-use sensors.
• Fast to apply spring-loaded finger clip suits spot checks and short-term continuous monitoring.
• 12-month warranty supplied new for dependable performance.

Features

• Adult patient size, hard shell finger clip sensor style
• Novametrix SpO2 technology
• 3.0m (9.8ft) one-piece sensor cable with keyed round monitor connector
• Soft internal pads for patient comfort and stable sensor positioning
• Reusable – wipe clean between patients

Technical Specifications

Part Number Cross-Reference

Works With These Spacelabs Monitors

This adult SpO2 finger sensor is designed for use with the following Spacelabs models:

• Spacelabs 466, 90303B, 90308, 90309, 90343
• Spacelabs 90351-0/6, 90351-G, 90351D, 90369
• Spacelabs 90465, 90466, 90467, 90489
• Spacelabs 90651-08, 90651A, 90651A-08, 91343
• Spacelabs IM77, PC Scout, Scout

Please confirm your monitor model, SpO2 technology (Novametrix) and existing sensor part number before ordering.

Use Cases

• Bedside patient monitoring in general wards, ICU and recovery
• Operating theatre and anaesthesia monitoring
• Emergency departments and patient transport
• Clinics, day surgeries and biomedical engineering spare stock

Application and Care

• Place the sensor on a clean, dry adult finger with the cable running along the back of the hand.
• Check the sensor site regularly and reposition during extended monitoring.
• Clean the surface with a soft cloth and an approved mild disinfectant between patients. Do not immerse or autoclave.
• Inspect the cable and connector for damage before each use.

Frequently Asked Questions

What is the Spacelabs 015-0130-01 SpO2 sensor?

It is a reusable adult hard shell finger clip sensor that measures blood oxygen saturation (SpO2) and pulse rate on Spacelabs monitors using Novametrix SpO2 technology. This unit has a 3.0m cable.

Which Spacelabs monitors does this sensor work with?

It works with Spacelabs 466, 90303B, 90308, 90309, 90343, 90351 series, 90369, 90465, 90466, 90467, 90489, 90651-08, 90651A, 90651A-08, 91343, IM77, PC Scout and Scout models.

Which part numbers does this sensor cross-reference to?

Spacelabs 015-0130-00, 015-0130-01 and 90651A-08, as well as AMC PR-A120-1020 and Unimed U410-04.

Is this sensor reusable?

Yes. It is a reusable hard shell sensor intended for multiple patients when cleaned and disinfected between uses.

Will it work on a Spacelabs monitor with Nellcor or Masimo SpO2?

No. This sensor is for Spacelabs monitors with Novametrix SpO2 technology. Monitors fitted with Nellcor or Masimo SET technology need a sensor made for that technology.

What patient size is it for?

It is sized for adult fingers.

What warranty is included?

The sensor is supplied new with a 12-month warranty.

Related SpO2 Sensors

Need a different technology or patient size?

See the Spacelabs Adult Hard Shell SpO2 Sensor 3.0m (Nellcor Oxismart), the Spacelabs Adult Hard Shell SpO2 Sensor 3.0m (Masimo SET), the Spacelabs Adult Soft Tip SpO2 Sensor 1.0m, the Spacelabs Pediatric Hard Shell SpO2 Sensor 3.0m and the Spacelabs Neonate Wrap SpO2 Sensor 3.0m.