The Northern Meditec Taurus SpO2 Sensor is a reusable adult hard shell finger-clip pulse oximetry probe with a 3.0 m cable, built to the Northern Meditec Taurus monitor reference specifications.
It measures functional oxygen saturation (SpO2) and pulse rate on adult patients and plugs into the SpO2 port of the Northern Meditec Taurus patient monitor. Each sensor is supplied brand new, one piece per bag.
Why Choose This Northern Meditec Taurus Pulse Oximeter Sensor
- Made for the Taurus monitor the keyed blue connector is designed for the Northern Meditec Taurus SpO2 input.
- Rigid hard shell finger clip a spring-loaded clip keeps the emitter and detector aligned on the fingertip for steady readings.
- Long 3.0 m cable about 9.8 ft of reach, so the monitor can sit well clear of the bed.
- Reusable design wipe clean between patients and use again, lowering cost per reading against single-use sensors.
- produced to recognised medical device quality standards.
- 12-month warranty supplied new with warranty cover.
Key Features of the Adult Hard Shell SpO2 Probe
- Adult finger clip with soft inner pads for patient comfort
- Latch-style keyed connector for a secure, correctly oriented fit
- Flexible, kink-resistant grey cable, 3.0 m in length
- Reusable lifecycle for multi-patient use with routine surface cleaning
Northern Meditec Taurus SpO2 Sensor Specifications
| Product | Adult Hard Shell (Finger Clip) SpO2 Sensor |
|---|---|
| Works With | Northern Meditec Taurus patient monitor |
| Patient Size | Adult |
| Sensor Type | Hard shell finger clip |
| Cable Length | 3.0 m (9.8 ft) |
| Lifecycle | Reusable |
| Condition | New |
| Warranty | 12 months |
| Packaging | 1 pc per bag |
Works With These Patient Monitors
| OEM Brand | Monitor Model |
|---|---|
| Northern Meditec | Taurus |
Always check the connector shape on your existing sensor or in your monitor manual before ordering. The Northern Meditec Aquarius uses a different connector and needs a different sensor.
Clinical Use Cases for the Reusable Adult Finger Clip Sensor
Where It Is Used
- Hospital wards and step-down units for routine SpO2 checks
- Emergency departments and triage areas
- Outpatient clinics, day surgery and recovery rooms
- Clinics and care facilities running Northern Meditec Taurus monitors
Best Suited For
- Adult patients (typically over 40 kg) with average finger size
- Spot-check and short-term monitoring where a rigid clip is preferred
- Keeping a spare probe on hand when a Taurus sensor is worn, damaged or lost
How to Use and Care for the Sensor
- Push the connector firmly into the SpO2 port of the Taurus monitor.
- Place the patient’s index, middle or ring finger fully into the clip, with the cable running along the back of the hand.
- Wait for a steady plethysmograph waveform before relying on the SpO2 value.
- Move the sensor to a different finger at least every 4 hours during extended monitoring.
- Between patients, wipe the clip and cable with 70% isopropyl alcohol or a mild hospital disinfectant. Do not immerse, autoclave or steam sterilise.
Frequently Asked Questions
Which monitor does the Northern Meditec Taurus SpO2 Sensor work with?
It works with the Northern Meditec Taurus patient monitor and plugs directly into the monitor’s SpO2 port.
Is this adult hard shell SpO2 sensor reusable?
Yes. It is a reusable finger-clip sensor that can be wiped clean and disinfected between adult patients.
How long is the cable?
The cable is 3.0 metres (about 9.8 feet) from the finger clip to the connector.
Does it fit the Northern Meditec Aquarius monitor?
No. This sensor is specified for the Taurus model. The Aquarius uses a different connector and requires its own sensor.
Can it be used on children or neonates?
No. The clip is sized for adult fingers. Pediatric and neonate patients need a sensor made for their size.
Reviews
There are no reviews yet.