The Nellcor Oxismart Adult Soft Tip SpO2 Sensor 3.0m is a reusable pulse oximetry finger probe with a soft silicone sleeve, a 3.0m cable and a latching multi-pin connector, built to the Nellcor Oxismart reference specifications (cross-reference Unimed U410S-69).
It measures blood oxygen saturation (SpO2) and pulse rate on adult patients when connected to a patient monitor, vital signs monitor or defibrillator that uses Nellcor Oxismart SpO2 technology. The sensor is supplied new, 1 piece per bag.
Benefits of This Adult Soft Tip Pulse Oximeter Sensor
- Gentle on the finger: The one-piece silicone sleeve has no hard spring clip, which reduces pressure during long monitoring sessions.
- Wide monitor coverage: Works with Nellcor Oxismart SpO2 ports across more than 20 monitor brands, listed below.
- Long reach: The 3.0m (9.8 ft) cable runs from the patient to the monitor without an extension cable.
- Lower running cost: A reusable, wipe-clean design replaces repeated single-use sensors.
- Backed by warranty: Supplied new with a 12-month warranty.
Key Features of the Nellcor Oxismart Soft Tip SpO2 Probe
Soft Silicone Finger Sleeve
- Flexible sleeve slides over the adult fingertip and holds the emitter and detector in line.
- Shields the optics from ambient light for a steadier reading.
- Smooth surface is easy to wipe clean between patients.
Nellcor Oxismart SpO2 Technology
- Made for monitors that use Nellcor Oxismart pulse oximetry.
- Reports SpO2 and pulse rate continuously or for spot checks.
3.0m Cable and Latching Connector
- Integrated 3.0m lead plugs straight into the monitor SpO2 port.
- Rectangular multi-pin plug with side latches for a secure connection (see the connector image).
Technical Specifications
| Product | Adult Soft Tip SpO2 Sensor, Reusable |
|---|---|
| Cross-Reference Part Number | Unimed U410S-69 |
| SpO2 Technology | Nellcor Oxismart |
| Patient Size | Adult |
| Sensor Type | Soft Tip (silicone finger sleeve) |
| Connector | Rectangular latching multi-pin plug |
| Cable Length | 3.0m (9.8 ft) |
| Lifecycle | Reusable |
| Unit | 1 pc per bag |
| Warranty | 12 Months |
| Condition | New |
Works With These Nellcor Oxismart Monitors
Confirm that your monitor model and its SpO2 connector match before ordering.
| Brand | Models |
|---|---|
| Bitmos | sat 800, sat 801, sat 805, sat 816, satPuls |
| Cardell | 9403, 9500HD |
| Colin | BP-306, BP-508, BP-808, BP-88, BP-88S, BP-S510, Press-Mate, T105NXM |
| Criticare/CSI | 506DNV3, 506DNVP3, 506LNV3, 506LNVP3, 506NV3, 506NVP3 |
| Datascope | Accutor V, Accutorr Plus, Accutorr Plus (Nellcor), EPM4, Passport 2LT, Passport XG, T8, V12, V21 |
| Datex Ohmeda | Cardiocap/5, enGuard CM5 |
| Digicare | LW600 |
| DRE | Waveline |
| Fukuda Denshi | Dynascope DS-7100 |
| GE Healthcare | 511, Carescape B650, Carescape V100, Dinamap ProCare with Masimo Pro 1000, E-NSAT, M-NSAT Modules, Pro 1000, Pro 1000 V3, Pro 200, Pro 300, Pro 300V2, Pro 400, Pro Series, Pro Series V2, ProCare, ProCare 200, ProCare 300, ProCare 400, ProCare Ausculatory 400, ProSeries V2, V300 |
| Invivo | 200, Escort II OPT30 Prism, MDE Escort Prism |
| Masimo | Rad 5 |
| Mediana | YM6000 |
| Mindray | Accutorr V, Duo, Passport 2, Passport V, Spectrum, Spectrum OR, Trio |
| Mortara | S12 |
| Nellcor | N 3000, N 3100, N 390, N 395, N 550, N 560, N 595, N 600, N 6000, N-600x, NPB 290, NPB 295, Symphony N-3000 |
| Nihon Kohden | BSM 2300, BSM 4100, BSM 4114A, BSM 5100, BSM-2304A, BSM-4104A |
| Oridion | Capnostream 20 |
| Philips | Prodigy, VS1 |
| Physio-Control | Lifepak 11, Lifepak 12, Lifepak 15, Lifepak 20, Lifepak 20E |
| Respironics | Alice 5 |
| Venni | All |
| Welch Allyn | 42NT0-E1 LXi, 45NE0-E1 LX, 53STP, Propaq CS, Spot Vital Signs 42MTB-E1, Spot Vital Signs 42NTB-E1, Spot Vital Signs LXi |
| Zoll | E Series, M Series, R Series |
Use Cases
- Continuous bedside SpO2 monitoring in ICU, CCU and general wards
- Emergency, transport and defibrillator-monitor use
- Operating theatres, recovery and procedural sedation
- Sleep studies, clinics and long-term care
- Replacing a worn or damaged adult finger sensor on a Nellcor Oxismart monitor
Application and Care
- Slide the sleeve over a clean adult fingertip with the cable running along the top of the finger.
- Wipe the sensor and cable between patients with 70% isopropyl alcohol or a facility-approved disinfectant.
- Do not immerse, autoclave or gas-sterilise the sensor.
- Check the sleeve and cable regularly and replace the sensor if damaged.
Frequently Asked Questions
What is the Nellcor Oxismart Adult Soft Tip SpO2 Sensor 3.0m?
It is a reusable adult finger sensor with a soft silicone sleeve and a 3.0m cable that measures SpO2 and pulse rate on monitors using Nellcor Oxismart technology.
Which part number does this sensor cross-reference?
It cross-references Unimed U410S-69.
How is a soft tip sensor different from a hard shell finger clip?
A soft tip sensor uses a flexible silicone sleeve instead of a spring-loaded clip, so it applies less pressure and suits longer monitoring periods.
How long is the cable?
The cable is 3.0 metres (about 9.8 ft) and connects directly to the monitor.
Is this SpO2 sensor reusable?
Yes. It is designed for repeated use and should be wiped clean between patients.
Is the patient monitor included?
No. This listing is for the sensor with its integrated cable only.
Related SpO2 Sensors
Need a different style or size?
See the Nellcor Oxismart Adult Hard Shell SpO2 Sensor 3.0m, Nellcor FlexMax Adult Soft Tip SpO2 Sensor 3.0m (9-Pin), Nellcor D-YSE Adult Ear Clip SpO2 Sensor 3.0m, Nellcor D-YSPD Pediatric Hard Shell SpO2 Sensor 3.0m and Nellcor OXI-A/N Neonate Wrap SpO2 Sensor 3.0m.
Reviews
There are no reviews yet.