Biolight A0212-SA125PV Adult Hard Shell SpO2 Sensor 3.0m (Digital 5 Pin Reusable New)

The Biolight A0212-SA125PV SpO2 sensor is a new, reusable adult hard shell finger sensor with a 3.0m cable and a 5-pin round push-pull connector, built to the Biolight A0212-SA125PV / 15-100-0010 reference specifications for patient monitors that use Digital SpO2 technology. It measures blood oxygen saturation (SpO2) and pulse rate on adult patients and connects directly to supported Biolight, Contec and other Digital-technology monitors.

Key Benefits of This Adult Reusable SpO2 Finger Sensor

• Direct-connect replacement: Matches the Biolight A0212-SA125PV and 15-100-0010 reference numbers, so no adapter is required on supported monitors.
• Long 3.0m reach: The one-piece 3.0m cable gives comfortable distance between patient and monitor in wards, theatres and recovery bays.
• Reusable and cost-effective: A durable hard shell housing designed for repeated use between patients after cleaning.
• Fast to apply: The spring-loaded hard shell clip positions on an adult finger in seconds for spot checks or continuous monitoring.
• Quality assured:

Features of the Biolight Digital SpO2 Sensor

• Adult hard shell (finger clip style) sensor housing with soft internal finger pads
• Digital SpO2 technology
• 5-pin round push-pull connector with keyed alignment
• 3.0m (approx. 9.8 ft) shielded cable
• Reusable lifecycle
• Supplied as 1 piece per bag

Technical Specifications

Part Number Cross-Reference

Works With These Patient Monitors

Please confirm your monitor uses Digital SpO2 technology with a 5-pin round SpO2 port before ordering. Contact us with your monitor model if you are unsure.

Use Cases

• Continuous SpO2 and pulse rate monitoring of adult patients in hospitals and clinics
• Spot-check oximetry in general wards, emergency and outpatient settings
• Replacement of a worn or damaged Biolight or Contec adult finger sensor
• Spare sensor stock for biomedical engineering departments

Application and Care

• Place the sensor on a clean adult finger with the cable running along the back of the hand.
• Reposition the sensor periodically during long monitoring sessions and check the skin site.
• Wipe the sensor and cable between patients following your facility’s cleaning protocol. Do not immerse or autoclave.
• Inspect the cable and connector for damage before each use.

Frequently Asked Questions

What does the Biolight A0212-SA125PV SpO2 sensor work with?

It works with patient monitors that use Digital SpO2 technology and a 5-pin round connector, including Contec CMS 6000, CMS 6800, CMS 7000, CMS 8000 and CMS 9000, Promed PM7000, Risingmed CMS60C and RPM 9000C, Sinohero S80, Sonolife SmartWave 12 and Venni VI-1060P, VI-1220P and VI-60D.

Is this the same as Biolight 15-100-0010?

Yes. This sensor cross-references to both Biolight A0212-SA125PV and Biolight 15-100-0010, as well as Contec ESA0004 and Unimed U410-46D.

How long is the cable?

The cable is 3.0 metres (approximately 9.8 feet) from the connector to the sensor.

Is this SpO2 sensor reusable?

Yes. It is a reusable adult hard shell sensor intended for multiple patients when cleaned between uses.

What patient size is it for?

It is designed for adult fingers. For neonates, choose a wrap sensor instead.

Is the sensor new?

Yes. This sensor is supplied brand new, 1 piece per bag.

Related SpO2 Sensors

Looking for a different size or connector?

See the Biolight 15-100-0012 Neonate Wrap SpO2 Sensor 3.0m, the shorter Adult Hard Shell SpO2 Sensor 1.0m for Biolight 15-100-0013, the Mindray 512FLL Adult Hard Shell SpO2 Sensor 3.0m, or the Edan M15-40099 Pediatric Hard Shell SpO2 Sensor 3.0m.