The Draeger 3368391 MultiMed 5 Pod is a multi-parameter trunk cable that joins a 5-lead ECG leadwire set, an SpO2 sensor and a temperature probe to a single 16-pin connector on Draeger / Siemens SC-series patient monitors. It is built to the 3368391 and 5950196 reference specifications and is supplied new, ready to connect to SC 6000, SC 6002XL, SC 7000, SC 9000 and SC 9000XL bedside monitors.
Why Choose This MultiMed 5 Pod ECG Trunk Cable
- One cable to the monitor: ECG, SpO2 and temperature signals travel through a single trunk, reducing cable clutter at the bedside.
- 5-lead ECG ready: Five colour-coded leadwire sockets on the pod accept individual ECG leadwires.
- Direct replacement: Matches reference part numbers 3368391 and 5950196, so no adapters or monitor changes are required.
- New condition: An unused replacement for a worn, cracked or intermittent pod.
- Quick changeover: Push-in 16-pin monitor plug for fast swap-out during servicing.
Key Features of the 3368391 ECG / SpO2 Pod
- MultiMed 5 style pod housing with blue connector face
- Five ECG leadwire inputs for 3-lead or 5-lead monitoring sets
- Round SpO2 sensor port on the pod
- Round temperature probe port on the pod
- 16-pin trunk connector at the monitor end
- Flexible grey shielded trunk cable with moulded strain reliefs at both ends
Technical Specifications
| Specification | Detail |
|---|---|
| Product type | MultiMed 5 Pod ECG / SpO2 / temperature trunk cable |
| Reference part numbers | 3368391, 5950196 |
| Brand reference | Draeger (Dräger) / Siemens |
| ECG configuration | 5-lead |
| Monitor connector | 16-pin |
| Pod inputs | 5 x ECG leadwire, 1 x SpO2, 1 x temperature |
| Works with monitors | SC 6000, SC 6002XL, SC 7000, SC 9000, SC 9000XL |
| Cable colour | Grey, with blue pod face |
| Condition | New |
| Pack quantity | 1 piece |
Monitors This ECG Trunk Cable Works With
- Draeger / Siemens SC 6000
- Draeger / Siemens SC 6002XL
- Draeger / Siemens SC 7000
- Draeger / Siemens SC 9000
- Draeger / Siemens SC 9000XL
Please match the part number on your existing pod (3368391 or 5950196) and your monitor model before ordering.
Typical Use Cases
- Replacing a damaged or faulty MultiMed pod in ICU, theatre, recovery and emergency departments
- Biomedical engineering spares for SC-series monitor fleets
- Restoring ECG, SpO2 and temperature monitoring after intermittent signal or lead-off faults
- Equipping refurbished SC 6000 / SC 7000 / SC 9000XL monitors for return to service
Handling and Care
- Inspect the cable, pod and connector pins for damage before each use.
- Wipe clean with a facility-approved disinfectant; do not immerse or autoclave.
- Coil loosely for storage and avoid sharp bends near the strain reliefs.
Frequently Asked Questions
What is the Draeger 3368391 MultiMed 5 Pod?
It is a trunk cable with a pod that collects 5-lead ECG, SpO2 and temperature inputs and sends them to the monitor through one 16-pin connector.
Which monitors does the 3368391 cable fit?
It works with Draeger / Siemens SC 6000, SC 6002XL, SC 7000, SC 9000 and SC 9000XL patient monitors.
Is 5950196 the same cable as 3368391?
Both numbers are reference part numbers for this MultiMed 5 Pod trunk cable, and this unit is built to those reference specifications.
Are ECG leadwires or an SpO2 sensor included?
No. You receive the pod trunk cable only. ECG leadwires, SpO2 sensor and temperature probe are sold separately.
Is this cable new or refurbished?
It is supplied in new condition.
How many pins does the monitor connector have?
The monitor end uses a 16-pin connector.
Related ECG Cables and Monitoring Accessories
Complete your setup with the Draeger 2606495 3-lead ECG trunk cable, the Drager ECG NEO adapter cable MS25951, 3/5/6-lead ECG leadwires and extension cables, the Draeger Infinity adult SpO2 sensor (Masimo SET) or the Draeger Infinity adult SpO2 sensor (OxiMax).
Reviews
There are no reviews yet.