Criticare CSI 934-10DN Adult Finger Clip SpO2 Sensor 3.0m (New)

The Criticare CSI 934-10DN Adult Finger Clip SpO2 Sensor is a new, reusable pulse oximetry sensor built to the Criticare(CSI) SpO2 technology reference specifications. It features a 3.0-meter (9.8 ft) cable and a 5-pin monitor-end connector, and clips onto an adult patient’s finger to continuously measure blood oxygen saturation (SpO2) and pulse rate. It works with Criticare/CSI, Alaris/Ivac VitalCheck, and Datascope patient monitors that use the matching connector and SpO2 technology.

Key Features & Benefits

• New, reusable hard-shell finger clip housing for continuous adult SpO2 monitoring
• 3.0m (9.8 ft) cable gives clinicians room to position the monitor away from the bedside
• 5-pin connector built to the Criticare(CSI) SpO2 technology reference specifications
• Works with a wide range of Criticare/CSI, Alaris/Ivac VitalCheck, and Datascope monitors (full list below)
• Backed by a 12-month warranty
• Simple clip-on/clip-off design for fast patient changes

Technical Specifications of Criticare CSI 934-10DN

Cross-Reference Part Numbers

Works With These Patient Monitors

Criticare/CSI Monitor Models

1100, 500, 500A, 501, 502 series, 503, 503 Spot, 503DX, 503DX-W (mini Spot), 503S, 504, 504/P, 504DX, 504DX/P, 504DXN, 504DXP, 504O/P, 504US/P, 506 series (except 506LN3), 506 Spot CSI, 506DN, 506DN3, 506DNB, 506DNP3, 506DNT3, 506DNTP3, 506DNV3, 506DNVP3, 506DX, 506DXN, 506DXNT2, 506DXNTP2, 506LNP3, 506LNT3, 506LNTP3, 506LNV3, 506LNVP3, 506N3, 506NP3, 506NT3, 506NTP3, 506NV3, 506NVP3, 507, 507/S, 5070/P, 507E/P/R, 507EL, 507EL (Scholar III), 507ELC, 507ELC2, 507SD, 508, 509, 581, 8000 series, 8100 (Poet Plus), 8100 series, 8100E, 8100E Series (nGenuity), 8100EP, 8100H Series (nCompass), Mini Spot, nCompass, nGenuity, Poet (602-3A), Poet Plus, Poet R Plus, Scholar, Scholar III.

Alaris / Ivac VitalCheck Monitor Models

4415, VitalCheck 4400, VitalCheck 4400 511SD, VitalCheck 4410.

Datascope Monitor Models

2200.

Use Cases of Criticare CSI 934-10DN

• Continuous adult SpO2 and pulse-rate monitoring in hospital wards, operating rooms, and recovery areas
• Replacement sensor for clinics and biomeds standardising on Criticare(CSI)-technology finger clips
• Spare or backup sensor for Criticare/CSI, Alaris VitalCheck, and Datascope monitor fleets

Care & Maintenance

• Wipe the clip housing and cable with a facility-approved disinfectant between patients
• Inspect the clip spring and cable strain relief regularly for wear
• Avoid submerging the connector end in liquid
• Store coiled, away from sharp bends, when not in use

Frequently Asked Questions

What is the cable length of this Criticare CSI 934-10DN adult finger clip SpO2 sensor?

3.0 metres (approximately 9.8 ft), giving clinicians flexibility to position the patient monitor away from the bedside.

Which patient monitors work with this sensor?

It works with Criticare/CSI 500, 503, 504, 506, 507, 508, 509, 581, 8000, and 8100 series monitors, plus Alaris/Ivac VitalCheck 4400/4410/4415 and Datascope 2200 monitors that use the Criticare(CSI) SpO2 technology and matching 5-pin connector.

Is this sensor reusable or disposable?

Reusable. The hard-shell finger clip housing is designed for repeated use across multiple patients when cleaned per facility protocol between uses.

What patient size is this sensor designed for?

Adult patients.

Is this sensor new or refurbished?

New. Every unit ships unused and is backed by a 12-month warranty.

Related SpO2 Sensors

Explore related SpO2 sensors: Nellcor DS100A 9-Pin Adult Finger Clip SpO2 Sensor, Masimo 4050 RD Set DCI Short SpO2 Adult Clip, Philips M1194B Adult Ear Clip SpO2 Sensor 1.0m, Philips M1191BL Adult Soft Tip SpO2 Sensor 3.0m, and Adult Hard Shell SpO2 Sensor 1.0m Masimo 2053.