This Masimo 2054 Adult Hard Shell SpO2 Sensor finger sensor, built to work with Masimo Rainbow-enabled patient monitors. It delivers continuous SpO2 and pulse rate monitoring for adult patients in hospitals, clinics, ambulances, and home-care settings, and can be reused across patients when properly cleaned between uses.
The sensor clips onto an adult fingertip and uses Rainbow-technology light-based measurement to continuously track blood oxygen saturation (SpO2) and pulse rate. It is designed for SpO2 and pulse readings only; it does not measure SpCO or SpMet.
Key Benefits of Masimo 2054 Adult Hard Shell SpO2 Sensor
- Hard shell finger clip design stays securely positioned during extended monitoring
- Reusable construction reduces per-patient consumable costs versus disposable sensors
- 3.6m cable gives extended reach between the patient and monitor for bedside or mobile setups
- Rainbow-technology signal processing supports stable readings for adult patients
- Backed by a 12-month warranty against manufacturing defects
Features & Specifications
Every feature of this sensor is built around dependable adult SpO2 monitoring and easy integration into existing Rainbow-enabled monitoring systems.
Hard Shell Finger Clip
The rigid hard shell clip maintains consistent sensor-to-skin contact, helping to minimise signal dropout compared to soft wrap-style sensors.
3.6m Cable Length
A 3.6 metre (approximately 11.8 ft) cable connects the sensor to the monitor input or adapter cable, giving extra reach for bedside, transport, and mobile monitoring setups.
Rainbow Technology Reference
Built to the reference specifications of Masimo Rainbow-enabled monitors, using the same connector and signal format as the Masimo 2054 (Red DCI-DC12).
Specifications of Masimo 2054 Adult Hard Shell SpO2 Sensor
| Specification | Detail |
|---|---|
| Reference Number | Masimo 2054 (Red DCI-DC12); Masimo 2202 (SpO2 only) |
| Cross-Reference | Datrend MCSS009RBAF36; GE Healthcare 2068423-041; Unimed U411-87 |
| Sensor Type | Hard shell finger clip |
| Patient Size | Adult |
| Cable Length | 3.6m (approx. 11.8 ft) |
| Technology | Rainbow |
| Lifecycle | Reusable |
| Measurement Parameters | SpO2 and pulse rate only (does not read SpCO or SpMet) |
| Unit | 1 pcs/bag |
| Condition | New |
| Warranty | 12 months |
Monitor Reference List
This sensor is built to the reference specifications of equipment from the following OEM brands and models. Always confirm your monitor model and connector type before ordering.
- Masimo: Pronto, Pronto 7, Pronto with Next Generation SpHb, Rad-5, Rad-57, Rad-57c, Rad-57cm, Rad-57m, Rad-5v, Rad-8, Rad-87, Rad-97, Rad-97 NIBP, Rad-97 with NomoLine Capnography, Radical-7, Radical (20 pin)
- Physio-Control: Lifepak 15
- Zoll: X Series
- Comen: K12 Pro
Use Cases of Masimo 2054 Adult Hard Shell SpO2 Sensor
Hospital & ICU Monitoring
Continuous SpO2 monitoring for adult patients in intensive care, recovery, and general ward settings.
Emergency & Ambulance Use
The extended 3.6m cable supports reliable oxygen saturation readings during patient transport and emergency response, where extra reach between patient and monitor matters.
Outpatient & Clinic Settings
Spot-check and short-term SpO2 monitoring during outpatient procedures and consultations.
Care & Maintenance
- Wipe down or disinfect between patients following your facility’s infection-control protocol
- Inspect the cable and clip for wear or damage before each use
- Avoid harsh solvents that can degrade the housing or cable insulation
- Store in a clean, dry area away from direct sunlight when not in use
Frequently Asked Questions
Can this sensor be reused across multiple patients?
Yes. It is a reusable sensor and can be used on multiple patients when cleaned and disinfected according to your facility’s protocol between uses.
What does the cable length measure?
The cable measures 3.6 metres (approximately 11.8 feet) from the sensor clip to the connector end – longer than the standard 1.0m version, useful where extra reach is needed.
Does this sensor measure carbon monoxide (SpCO) or methemoglobin (SpMet)?
No. This sensor provides SpO2 and pulse rate readings only.
What patient size is Masimo 2054 Adult Hard Shell SpO2 Sensor designed for?
This sensor is designed for adult patients.
Which monitors is this sensor designed for?
It is built to the reference specifications of select Masimo Rainbow-enabled monitors, Physio-Control Lifepak 15, Zoll X Series, and Comen K12 Pro. Confirm your specific monitor model before ordering.
How is this different from the 1.0m Masimo 2053 sensor?
The Masimo 2053 (Red DCI-DC3) sensor uses a 1.0m cable, while this Masimo 2054 (Red DCI-DC12) sensor uses a longer 3.6m cable – both are adult hard shell, Rainbow-technology sensors, so choose based on the cable reach your setup requires.
Reviews
There are no reviews yet.