The Nellcor D-YSE Ear Clip SpO2 Sensor 1.0m is a new, reusable ear clip pulse oximetry sensor built to the Nellcor D-YSE, Non-OxiMax. The clip positions the emitter and detector over an adult earlobe and connects to the monitor through a 9-pin, Non-OxiMax plug at the end of a 1.0-metre cable, delivering continuous SpO2 and pulse-rate readings on Nellcor NPB/N-series and other Non-OxiMax-supported patient monitors.
Key Features of Nellcor D-YSE Ear Clip
- Ear clip design gives fast, stable SpO2 readings on patients with poor finger perfusion, cold extremities, nail polish, or acrylic nails
- 9-pin, Non-OxiMax plug — no adapter needed on Non-OxiMax-ready monitor ports
- Reusable housing lowers cost-per-patient compared with disposable sensors
- 1.0m (3.3ft) cable reaches comfortably from bedside monitors to the patient
9-Pin Connector for Non-OxiMax Nellcor Monitor Ports
Connector Details
- 9-pin direct-connect plug matching the Nellcor D-YSE, Non-OxiMax (Oxismart) sensor port
- Secure pin engagement for a stable, consistent SpO2 waveform
- Works directly with Non-OxiMax-enabled monitor ports — no adapter required
Technical Specifications of Nellcor D-YSE Ear Clip
| Product Name | Nellcor D-YSE Adult Ear Clip SpO2 Sensor |
| Model / Reference | D-YSE, Non-OxiMax (Nellcor Oxismart sensor interface) |
| Patient Size | Adult |
| Sensor Type | Ear Clip |
| SpO2 Technology | Nellcor Oxismart |
| Connector Type | 9-pin, Non-OxiMax |
| Cable Length | 1.0m / 3.3ft |
| Lifecycle | Reusable |
| Condition | New |
| Warranty | 12 Months |
Monitor Fitment
This sensor works with patient monitors equipped with a 9-pin, Non-OxiMax Nellcor-style SpO2 port, including:
- BCI: 3300, Mini Torr Plus
- Bionics: BPM-200
- Bistos: BT-720
- Colin: BP-88S
- Datascope: BeneVision TMS60, DPM6
- Datex Ohmeda: Vitalmax 800 Series (black, Nellcor SpO2)
- Edan: iM3, iM8, M9
- GE Healthcare: 511, 556, SOLAR Series
- Huntleigh: SC1000
- Ivy Biomedical: 405D
- Lumeon: Hand-held Oximeter
- Marquette: Dash 3000, PDM Module, Solar 8000M
- Mindray: BeneHeart D3, BeneHeart D6, BeneVision ePM10/ePM10 Neo/ePM10M/ePM12/ePM12M/ePM15, BeneVision N1/N12/N12 Neo/N15/N15 Neo/N15 OR/N17/N17 Neo/N19/N22, BeneVision TMS-6016, BeneVision TMS30/VS900, BeneVision uMEC10/uMEC12, BeneVision VS-600/VS-900/VS-900 Neo, MEC 1200, Passport, Spectrum
- Nellcor: N 3000, N 390, NPB 3930, NPB 75
- Philips: M1350C, M1722A, M3927, M3929A, Merlin Systems
- Spacelabs: 90351-0/6, 90369, 91369
- Welch Allyn: Atlas (Nellcor SpO2)
Use Cases of Nellcor D-YSE Ear Clip
- ICU and bedside monitoring of sedated or low-perfusion patients where fingertip readings can be unreliable
- Facilities keeping Non-OxiMax Nellcor patient monitors in service without upgrading to OxiMax-only hardware
- Emergency department triage and stabilisation monitoring
- Patient transport and ambulatory monitoring, where the ear clip resists slipping off during movement
- Biomedical equipment suppliers refreshing Non-OxiMax Nellcor sensor inventory
Care & Maintenance
- Wipe the sensor housing and clip with a soft cloth and manufacturer-approved disinfectant between patients
- Do not immerse the connector or cable in liquid
- Inspect the cable and clip spring tension regularly for wear before each use
- Store the cable coiled loosely, away from direct sunlight and extreme temperatures
Frequently Asked Questions
What does “Non-OxiMax” / “Oxismart” mean on this Nellcor sensor?
Non-OxiMax (Oxismart) refers to Nellcor’s earlier-generation SpO2 sensor technology, built without the smart-chip connector used by newer OxiMax sensors. It is designed for older Nellcor NPB-series and N-series monitors that do not use the OxiMax platform.
Is Nellcor D-YSE Ear Clip fits OxiMax-only monitors?
No. This is a 9-pin, Non-OxiMax sensor and is not interchangeable with OxiMax-specific sensor ports. Confirm your monitor’s connector type before ordering.
What cable length and connector does Nellcor D-YSE Ear Clip use?
It has a 1.0-metre (3.3ft) cable and a 9-pin, Non-OxiMax connector.
Can this sensor be reused on multiple patients?
Yes. It is a reusable sensor intended for repeated clinical use, following your facility’s standard cleaning and disinfection protocol between patients.
Related SpO2 Sensors
See our Nellcor adult ear clip SpO2 sensor, 9-pin OxiMax, the Nellcor ear clip SpO2 sensor, Non-OxiMax 7-pin, the Nellcor D-YSPD pediatric hard-shell SpO2 sensor, the Nellcor DS100A adult finger clip SpO2 sensor, or the Philips M1194B adult ear clip SpO2 sensor 1.0m.
Reviews
There are no reviews yet.